Litwas
02.09.03, 12:42
Hi,
ich wollte jetzt zum ersten mal meinen CD-RW Brenner ausprobieren.
Nach dem ich die die iso datei erstellt habe "mkisofs -RJ -o image.iso test/", versuche ich es auf eine CD-RW zubrennen.( CD-R habe ich nicht ausprobiert, da ich wöchentlich meine htdocs und verschiedene Scripte auf CD-RW sichern will)
Hier die Ausgabe von "cdrecord -v speed=2 dev=0,0,0 image.iso":
Cdrecord 1.11a05 (i686-suse-linux) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.20
Using libscg version 'schily-0.5'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'LG '
Identifikation : 'CD-RW CED-8083B '
Revision : '1.06'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1024000 = 1000 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 0 MB padsize: 472 KB
Total size: 0 MB (00:04.02) = 302 sectors
Lout start: 1 MB (00:06/02) = 302 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 0
Reference speed: 0
Is not unrestricted
Is erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -11077 (97:34/23)
ATIP start of lead out: 336075 (74:43/00)
speed low: 0 speed high: 0
speed low: 0 speed high: 0
power mult factor: 0 0
recommended erase/write power: 0
A2 values: 00 00 00
A3 values: 00 00 00
Disk type: Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Trying to clear drive status.
cdrecord: Drive needs to reload the media to return to proper status.
cdrecord: Input/output error. start/stop unit: scsi sendcmd: no error
CDB: 1B 00 00 00 02 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 B6 00 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0xB6 Qual 0x00 (vendor unique sense code 0xB6) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 8.552s timeout 40s
Blocks total: 336075 Blocks current: 336075 Blocks remaining: 335773
Starting to write CD/DVD at speed 2 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 0 of 0 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 09 00 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x09 Qual 0x00 (track following error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 3.511s timeout 40s
write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Writing time: 8.530s
Fixating...
cdrecord: Input/output error. close track/session: scsi sendcmd: no error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 480s
cmd finished after 0.000s timeout 480s
Fixating time: 0.002s
cdrecord: fifo had 3 puts and 1 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
Was ist hier falsch, warum geht das nicht?
Vielen Dank
Litwas
ich wollte jetzt zum ersten mal meinen CD-RW Brenner ausprobieren.
Nach dem ich die die iso datei erstellt habe "mkisofs -RJ -o image.iso test/", versuche ich es auf eine CD-RW zubrennen.( CD-R habe ich nicht ausprobiert, da ich wöchentlich meine htdocs und verschiedene Scripte auf CD-RW sichern will)
Hier die Ausgabe von "cdrecord -v speed=2 dev=0,0,0 image.iso":
Cdrecord 1.11a05 (i686-suse-linux) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.20
Using libscg version 'schily-0.5'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'LG '
Identifikation : 'CD-RW CED-8083B '
Revision : '1.06'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1024000 = 1000 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 0 MB padsize: 472 KB
Total size: 0 MB (00:04.02) = 302 sectors
Lout start: 1 MB (00:06/02) = 302 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 0
Reference speed: 0
Is not unrestricted
Is erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -11077 (97:34/23)
ATIP start of lead out: 336075 (74:43/00)
speed low: 0 speed high: 0
speed low: 0 speed high: 0
power mult factor: 0 0
recommended erase/write power: 0
A2 values: 00 00 00
A3 values: 00 00 00
Disk type: Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Trying to clear drive status.
cdrecord: Drive needs to reload the media to return to proper status.
cdrecord: Input/output error. start/stop unit: scsi sendcmd: no error
CDB: 1B 00 00 00 02 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 B6 00 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0xB6 Qual 0x00 (vendor unique sense code 0xB6) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 8.552s timeout 40s
Blocks total: 336075 Blocks current: 336075 Blocks remaining: 335773
Starting to write CD/DVD at speed 2 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 0 of 0 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 09 00 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x09 Qual 0x00 (track following error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 3.511s timeout 40s
write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Writing time: 8.530s
Fixating...
cdrecord: Input/output error. close track/session: scsi sendcmd: no error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 480s
cmd finished after 0.000s timeout 480s
Fixating time: 0.002s
cdrecord: fifo had 3 puts and 1 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
Was ist hier falsch, warum geht das nicht?
Vielen Dank
Litwas