Archiv verlassen und diese Seite im Standarddesign anzeigen : SUSE Linux 7.2 startet nach Kernelupdate nicht mehr, bootmsg.log inside
Hallo,
ich wollte auf unserem Puretec Root Server mal aus spass den Kernel neukompilieren, ging auch ohne Probleme, nur nach dem reboot startet der Server nicht mehr!
Komme zum Glück noch per Rescuesystem drauf und kann die bootmsg.log auslesen, nur verstehe nicht so ganz, woran es liegt, hier mal ein Auszug aus dem Ende:
<6> hda: hda1 hda2 hda3
<6>8139too Fast Ethernet driver 0.9.24
<6>eth0: RealTek RTL8139 Fast Ethernet at 0xd0000000, 00:20:ed:37:ff:f4, IRQ 15
<7>eth0: Identified 8139 chip type 'RTL-8139C'
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<4>IP: routing cache hash table of 2048 buckets, 16Kbytes
<4>TCP: Hash tables configured (established 16384 bind 16384)
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<4>VFS: Mounted root (ext2 filesystem) readonly.
<4>Freeing unused kernel memory: 220k freed
<6>Adding Swap: 787176k swap-space (priority -1)
<4>EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Weiss einer woran es liegt und wie ich ihn wieder zum normalen booten überreden kann?
Hi,
Viel steht da nicht, aber "running e2fsck is recommended" ist mal ein guter Vorschlag. Wenn du noch eine Shell bekommst, lass man e2fsck über alle Partitionen laufen. Sie sollten aber nicht gemountet sein.
Ciao, Bernie
Hi,
<4>EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ist glaube ich nicht Dein Problem...
Hast Du die Module auch neu erzeugt?
Ist das Dateisystem der Rootpartition im Kernel oder als Modul gebaut?
Hast du für Deinen Kernel eine initrd angelegt?
Theoretisch müsste das Kernelimage vmlinuz.suse noch da sein. Boot doch mal darüber, dann kommst Du wenigstens auf das System...
<4>EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ist glaube ich nicht Dein Problem...
ja, habe per rescue system von puretec gestartet und die platte überprüfen lassen und nach dem Neustart ging wieder nichts! Gleiche Fehlermeldung um bootmsg.log.
Hast Du die Module auch neu erzeugt?
Ist das Dateisystem der Rootpartition im Kernel oder als Modul gebaut?
Hast du für Deinen Kernel eine initrd angelegt?
Habe es so gemacht, wie hier (http://faq.puretec.de/server/root_server/bugfx/3.html) beschrieben, nur mit kernel-2.1.18.tar.gz vom gleichen puretec server!
Theoretisch müsste das Kernelimage vmlinuz.suse noch da sein. Boot doch mal darüber, dann kommst Du wenigstens auf das System
Sorry für diese Newbie Frage, aber bisher musste ich sowas noch nie machen: wie mache ich das genau?
Ja, das existiert noch!
melody lee
16.08.02, 17:36
>Habe es so gemacht, wie hier beschrieben, nur mit kernel-2.1.18.tar.gz
Ich geh' jetzt einfach mal davon aus, dass Du Dich hier ----^---- nur vertippt hast.
>bisher musste ich sowas noch nie machen: wie mache ich das genau?
Am LILO-Promt (beim booten also) [TAB] oder [shift] drücken und dann an dem "boot:"-Promt "vmlinuz.suse" (oder wie der alte Kernel auch immer heisst) eingeben.
tja, ist wie gesagt ein root server, d.h. das ich nur per console drauf herumwerkeln kann.
Nachdem nun die Platte repariert wurde geht es trotzdem nicht, gibt aber ne andere bootmsg.log:
Inspecting /boot/System.map-2.4.18
Loaded 13624 symbols from /boot/System.map-2.4.18.
Symbols match kernel version 2.4.18.
No module symbols loaded.
klogd 1.3-3, log source = ksyslog started.
<4>Linux version 2.4.18 (root@install-srv) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #1 SMP Mon Jun 24 17:36:52 CEST 2002
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
<4> BIOS-e820: 000000000f7f0000 - 000000000f7f3000 (ACPI NVS)
<4> BIOS-e820: 000000000f7f3000 - 000000000f800000 (ACPI data)
<4> BIOS-e820: 000000000f800000 - 0000000010000000 (reserved)
<4> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
<4>found SMP MP-table at 000f5870
<4>hm, page 000f5000 reserved twice.
<4>hm, page 000f6000 reserved twice.
<4>hm, page 000f1000 reserved twice.
<4>hm, page 000f2000 reserved twice.
<4>On node 0 totalpages: 63472
<4>zone(0): 4096 pages.
<4>zone(1): 59376 pages.
<4>zone(2): 0 pages.
<4>Intel MultiProcessor Specification v1.4
<4> Virtual Wire compatibility mode.
<4>OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
<4>Processor #0 Pentium(tm) Pro APIC version 17
<4>I/O APIC #2 Version 17 at 0xFEC00000.
<4>Processors: 1
<4>Kernel command line: auto BOOT_IMAGE=linux ro root=303 BOOT_FILE=/boot/vmlinuz BOOT_FILE=/boot/vmlinuz
<6>Initializing CPU#0
<4>Detected 1202.742 MHz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 2398.61 BogoMIPS
<4>Memory: 247808k/253888k available (862k kernel code, 5696k reserved, 234k data, 220k init, 0k highmem)
<4>Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
<4>Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
<4>Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
<4>Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
<7>CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 256K
<7>CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
<7>CPU: Common caps: 0383fbff 00000000 00000000 00000000
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<7>CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 256K
<7>CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
<7>CPU: Common caps: 0383fbff 00000000 00000000 00000000
<4>CPU0: Intel(R) Celeron(TM) CPU 1200MHz stepping 01
<4>per-CPU timeslice cutoff: 731.53 usecs.
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<3>Error: only one processor found.
<4>ENABLING IO-APIC IRQs
<4>Setting 2 in the phys_id_present_map
<6>...changing IO-APIC physical APIC ID to 2 ... ok.
<7>init IO_APIC IRQs
<7> IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
<6>..TIMER: vector=0x31 pin1=2 pin2=0
<7>number of MP IRQ sources: 18.
<7>number of IO-APIC #2 registers: 24.
<6>testing the IO APIC.......................
<4>
<7>IO APIC #2......
<7>.... register #00: 02000000
<7>....... : physical APIC id: 02
<7>.... register #01: 00178011
<7>....... : max redirection entries: 0017
<7>....... : PRQ implemented: 1
<7>....... : IO APIC version: 0011
<7>.... register #02: 00000000
<7>....... : arbitration: 00
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 000 00 1 0 0 0 0 0 0 00
<7> 01 001 01 0 0 0 0 0 1 1 39
<7> 02 001 01 0 0 0 0 0 1 1 31
<7> 03 001 01 0 0 0 0 0 1 1 41
<7> 04 001 01 0 0 0 0 0 1 1 49
<7> 05 001 01 0 0 0 0 0 1 1 51
<7> 06 001 01 0 0 0 0 0 1 1 59
<7> 07 001 01 0 0 0 0 0 1 1 61
<7> 08 001 01 0 0 0 0 0 1 1 69
<7> 09 001 01 0 0 0 0 0 1 1 71
<7> 0a 001 01 1 1 0 1 0 1 1 79
<7> 0b 001 01 1 1 0 1 0 1 1 81
<7> 0c 001 01 0 0 0 0 0 1 1 89
<7> 0d 001 01 0 0 0 0 0 1 1 91
<7> 0e 001 01 0 0 0 0 0 1 1 99
<7> 0f 001 01 1 1 0 1 0 1 1 A1
<7> 10 000 00 1 0 0 0 0 0 0 00
<7> 11 000 00 1 0 0 0 0 0 0 00
<7> 12 000 00 1 0 0 0 0 0 0 00
<7> 13 000 00 1 0 0 0 0 0 0 00
<7> 14 000 00 1 0 0 0 0 0 0 00
<7> 15 000 00 1 0 0 0 0 0 0 00
<7> 16 000 00 1 0 0 0 0 0 0 00
<7> 17 000 00 1 0 0 0 0 0 0 00
<7>IRQ to pin mappings:
<7>IRQ0 -> 0:2
<7>IRQ1 -> 0:1
<7>IRQ3 -> 0:3
<7>IRQ4 -> 0:4
<7>IRQ5 -> 0:5
<7>IRQ6 -> 0:6
<7>IRQ7 -> 0:7
<7>IRQ8 -> 0:8
<7>IRQ9 -> 0:9
<7>IRQ10 -> 0:10
<7>IRQ11 -> 0:11
<7>IRQ12 -> 0:12
<7>IRQ13 -> 0:13
<7>IRQ14 -> 0:14
<7>IRQ15 -> 0:15
<6>.................................... done.
<4>Using local APIC timer interrupts.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 1202.7966 MHz.
<4>..... host bus clock speed is 100.2329 MHz.
<4>cpu: 0, clocks: 1002329, slice: 501164
<4>CPU0<T0:1002320,T1:501152,D:4,S:501164,C:1002329>
<4>Waiting on wait_init_idle (map = 0x0)
<4>All processors have done init_idle
<4>PCI: PCI BIOS revision 2.10 entry at 0xfb370, last bus=1
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<3>Unknown bridge resource 0: assuming transparent
<3>Unknown bridge resource 2: assuming transparent
<6>PCI: Using IRQ router VIA [1106/0686] at 00:07.0
<6>PCI->APIC IRQ transform: (B0,I13,P0) -> 15
<6>PCI->APIC IRQ transform: (B1,I0,P0) -> 11
<6>PCI: Enabling Via external APIC routing
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<5>VFS: Diskquotas version dquot_6.4.0 initialized
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
<4>keyboard: Timeout - AT keyboard not present?(ed)
<4>keyboard: Timeout - AT keyboard not present?(f4)
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<4>block: 128 slots per queue, batch=32
<6>Uniform Multi-Platform E-IDE driver Revision: 6.31
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<4>VP_IDE: IDE controller on PCI bus 00 dev 39
<4>VP_IDE: chipset revision 6
<4>VP_IDE: not 100%% native mode: will probe irqs later
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
<4> ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio
<4>hda: IC35L040AVVA07-0, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<6>hda: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=5005/255/63, UDMA(33)
<6>Partition check:
<6> hda: hda1 hda2 hda3
<6>8139too Fast Ethernet driver 0.9.24
<6>eth0: RealTek RTL8139 Fast Ethernet at 0xd0000000, 00:20:ed:37:ff:f4, IRQ 15
<7>eth0: Identified 8139 chip type 'RTL-8139C'
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<4>IP: routing cache hash table of 2048 buckets, 16Kbytes
<4>TCP: Hash tables configured (established 16384 bind 16384)
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<4>VFS: Mounted root (ext2 filesystem) readonly.
<4>Freeing unused kernel memory: 220k freed
<6>Adding Swap: 787176k swap-space (priority -1)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Hi,
in der boot.msg kann ich keine Fehlermeldung sehen. Das ist alles unauffällig...
Außer dass puretec einen Debian Kernel auf Suse laufen lässt - aber das muß ja nix schlechtes sein.
Um die vmlinuz.suse zu booten machst Du:
# Rettungssystem booten
# Rootpartition nach /mnt mounten
#Changeroot auf /mnt
chroot /mnt
#bootpartition mounten
mount /boot
# lilo auf vmlinuz.suse setzen
lilo -R suse
umount /boot
#chroot verlassen
exit
umount /mnt
reboot
Dann schaun mer mal weiter ....
Nun, wollte das gerade machen, doch schon beim 2. Schritt kommt ein Fehler:
root@rescue:/# mount /boot
mount: /dev/hda1 has wrong device number or fs type ext3,ext2 not supported
Wie kann ich den beheben?
Ok, /boot ist gemountet, und lilo gibt folgendes aus:
root@rescue:/# lilo
Added linux *
Added linux.old
Added linux.suse
Added memtest86
Aber
lilo -R suse gibt das aus:
root@rescue:/# lilo -R suse
Fatal: No image "suse" is defined
Wie kann ich das nun definieren? Sollte doch so gehen...
Original geschrieben von BendAR
Ok, /boot ist gemountet, und lilo gibt folgendes aus:
Added linux.suse
Aber lilo -R suse gibt das aus:
root@rescue:/# lilo -R suse
Fatal: No image "suse" is defined
Wie kann ich das nun definieren? Sollte doch so gehen... Hi,
es wird ja langsam. Komische Namensgebung von Puretec, aber OK,
in diesem fall muß es
lilo -R linux.suse
heißen.
root@rescue:/# mount /boot
mount: /dev/hda1 has wrong device number or fs type ext3,ext2 not supportedWas hast Du gemacht, dass es plötzlich ging?
lilo -R linux.suse
Bringt leider nichts! Bootet wieder wie vorher, bootmsg sagt das gleiche!
Was hast Du gemacht, dass es plötzlich ging?
mount /dev/hda1 /mnt/boot
mount /dev/hda3 /mnt
chroot /mnt
Was soll ich noch probieren? ODer lieber gleich den Server zurücksetzen lassen? Noch ist nichts wichtiges drauf!
Inspecting /boot/System.map-2.4.4-4GB
Loaded 10917 symbols from /boot/System.map-2.4.4-4GB.
Symbols match kernel version 2.4.4.
No module symbols loaded.
klogd 1.3-3, log source = ksyslog started.
<4>Linux version 2.4.4-4GB (root@Pentium.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 Sat Jun 23 05:26:59 GMT 2001
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
<4> BIOS-e820: 000000000f7f0000 - 000000000f7f3000 (ACPI NVS)
<4> BIOS-e820: 000000000f7f3000 - 000000000f800000 (ACPI data)
<4> BIOS-e820: 000000000f800000 - 0000000010000000 (reserved)
<4> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
<4>Scan SMP from c0000000 for 1024 bytes.
<4>Scan SMP from c009fc00 for 1024 bytes.
<4>Scan SMP from c00f0000 for 65536 bytes.
<4>found SMP MP-table at 000f5870
<4>hm, page 000f5000 reserved twice.
<4>hm, page 000f6000 reserved twice.
<4>hm, page 000f1000 reserved twice.
<4>hm, page 000f2000 reserved twice.
<4>On node 0 totalpages: 63472
<4>zone(0): 4096 pages.
<4>zone(1): 59376 pages.
<4>zone(2): 0 pages.
<4>Intel MultiProcessor Specification v1.4
<4> Virtual Wire compatibility mode.
<4>OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
<4>Processor #0 Pentium(tm) Pro APIC version 17
<4> Floating point unit present.
<4> Machine Exception supported.
<4> 64 bit compare & exchange supported.
<4> Internal APIC present.
<4> SEP present.
<4> MTRR present.
<4> PGE present.
<4> MCA present.
<4> CMOV present.
<4> Bootup CPU
<4>Bus #0 is PCI
<4>Bus #1 is PCI
<4>Bus #2 is ISA
<4>I/O APIC #2 Version 17 at 0xFEC00000.
<4>Int: type 0, pol 3, trig 3, bus 0, IRQ 1e, APIC ID 2, APIC INT 0a
<4>Int: type 0, pol 3, trig 3, bus 0, IRQ 1e, APIC ID 2, APIC INT 0a
<4>Int: type 0, pol 3, trig 3, bus 1, IRQ 00, APIC ID 2, APIC INT 0b
<4>Int: type 0, pol 3, trig 3, bus 0, IRQ 34, APIC ID 2, APIC INT 0f
<4>Int: type 3, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 00
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 01, APIC ID 2, APIC INT 01
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 02
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 03, APIC ID 2, APIC INT 03
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 04, APIC ID 2, APIC INT 04
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 05, APIC ID 2, APIC INT 05
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 06, APIC ID 2, APIC INT 06
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 07, APIC ID 2, APIC INT 07
<4>Int: type 0, pol 1, trig 1, bus 2, IRQ 08, APIC ID 2, APIC INT 08
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 09, APIC ID 2, APIC INT 09
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 0c, APIC ID 2, APIC INT 0c
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 0d, APIC ID 2, APIC INT 0d
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 0e, APIC ID 2, APIC INT 0e
<4>Int: type 2, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 17
<4>Lint: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 00
<4>Lint: type 1, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 01
<4>Processors: 1
<4>mapped APIC to ffffe000 (fee00000)
<4>mapped IOAPIC to ffffd000 (fec00000)
<4>Kernel command line: auto BOOT_IMAGE=linux.suse ro root=303 BOOT_FILE=/boot/vmlinuz.suse BOOT_FILE=/boot/vmlinuz
<6>Initializing CPU#0
<4>Detected 1202.772 MHz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 2398.61 BogoMIPS
<4>Memory: 246716k/253888k available (1225k kernel code, 6788k reserved, 933k data, 112k init, 0k highmem)
<4>Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
<4>Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
<4>Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
<5>VFS: Diskquotas version dquot_6.5.0 initialized
<7>CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 256K
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
<7>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
<7>CPU: Common caps: 0383fbff 00000000 00000000 00000000
<4>CPU: Intel(R) Celeron(TM) CPU 1200MHz stepping 01
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>ENABLING IO-APIC IRQs
<6>...changing IO-APIC physical APIC ID to 2 ... ok.
<4>Synchronizing Arb IDs.
<7>init IO_APIC IRQs
<7> IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
<6>..TIMER: vector=49 pin1=2 pin2=0
<7>number of MP IRQ sources: 18.
<7>number of IO-APIC #2 registers: 24.
<6>testing the IO APIC.......................
<4>
<7>IO APIC #2......
<7>.... register #00: 02000000
<7>....... : physical APIC id: 02
<7>.... register #01: 00178011
<7>....... : max redirection entries: 0017
<7>....... : IO APIC version: 0011
<4> WARNING: unexpected IO-APIC, please mail
<4> to linux-smp@vger.kernel.org
<7>.... register #02: 00000000
<7>....... : arbitration: 00
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 000 00 1 0 0 0 0 0 0 00
<7> 01 001 01 0 0 0 0 0 1 1 39
<7> 02 001 01 0 0 0 0 0 1 1 31
<7> 03 001 01 0 0 0 0 0 1 1 41
<7> 04 001 01 0 0 0 0 0 1 1 49
<7> 05 001 01 0 0 0 0 0 1 1 51
<7> 06 001 01 0 0 0 0 0 1 1 59
<7> 07 001 01 0 0 0 0 0 1 1 61
<7> 08 001 01 0 0 0 0 0 1 1 69
<7> 09 001 01 0 0 0 0 0 1 1 71
<7> 0a 001 01 1 1 0 1 0 1 1 79
<7> 0b 001 01 1 1 0 1 0 1 1 81
<7> 0c 001 01 0 0 0 0 0 1 1 89
<7> 0d 001 01 0 0 0 0 0 1 1 91
<7> 0e 001 01 0 0 0 0 0 1 1 99
<7> 0f 001 01 1 1 0 1 0 1 1 A1
<7> 10 000 00 1 0 0 0 0 0 0 00
<7> 11 000 00 1 0 0 0 0 0 0 00
<7> 12 000 00 1 0 0 0 0 0 0 00
<7> 13 000 00 1 0 0 0 0 0 0 00
<7> 14 000 00 1 0 0 0 0 0 0 00
<7> 15 000 00 1 0 0 0 0 0 0 00
<7> 16 000 00 1 0 0 0 0 0 0 00
<7> 17 000 00 1 0 0 0 0 0 0 00
<7>IRQ to pin mappings:
<7>IRQ0 -> 2
<7>IRQ1 -> 1
<7>IRQ3 -> 3
<7>IRQ4 -> 4
<7>IRQ5 -> 5
<7>IRQ6 -> 6
<7>IRQ7 -> 7
<7>IRQ8 -> 8
<7>IRQ9 -> 9
<7>IRQ10 -> 10
<7>IRQ11 -> 11
<7>IRQ12 -> 12
<7>IRQ13 -> 13
<7>IRQ14 -> 14
<7>IRQ15 -> 15
<6>.................................... done.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 1202.6934 MHz.
<4>..... host bus clock speed is 100.2244 MHz.
<4>cpu: 0, clocks: 1002244, slice: 501122
<4>CPU0<T0:1002240,T1:501104,D:14,S:501122,C:1002244>
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<4>PCI: PCI BIOS revision 2.10 entry at 0xfb370, last bus=1
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<3>Unknown bridge resource 0: assuming transparent
<3>Unknown bridge resource 2: assuming transparent
<6>PCI: Using IRQ router VIA [1106/0686] at 00:07.0
<6>PCI->APIC IRQ transform: (B0,I13,P0) -> 15
<6>PCI->APIC IRQ transform: (B1,I0,P0) -> 11
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14)
<4>Starting kswapd v1.8
<4>allocated 32 pages and 32 bhs reserved for the highmem bounces
<6>Detected PS/2 Mouse Port.
<4>pty: 256 Unix98 ptys configured
<4>block: queued sectors max/low 163816kB/54605kB, 512 slots per queue
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>Uniform Multi-Platform E-IDE driver Revision: 6.31
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<4>VP_IDE: IDE controller on PCI bus 00 dev 39
<4>VP_IDE: chipset revision 6
<4>VP_IDE: not 100%% native mode: will probe irqs later
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
<4> ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio
<4>keyboard: Timeout - AT keyboard not present?
<4>keyboard: Timeout - AT keyboard not present?
<4>hda: IC35L040AVVA07-0, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<6>hda: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=5005/255/63
<6>Partition check:
<6> hda: hda1 hda2 hda3
<4>floppy0: no floppy controllers found
<6>loop: loaded (max 8 devices)
<6>Serial driver version 5.05a (2001-03-20) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>Real Time Clock Driver v1.10d
<6>SCSI subsystem driver Revision: 1.00
<3>request_module[scsi_hostadapter]: Root fs not mounted
<3>request_module[scsi_hostadapter]: Root fs not mounted
<6>Uniform CD-ROM driver Revision: 3.12
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<4>IP: routing cache hash table of 2048 buckets, 16Kbytes
<4>TCP: Hash tables configured (established 16384 bind 16384)
<6>Linux IP multicast router 0.06 plus PIM-SM
<3>IP-Config: No network devices available.
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<4>VFS: Mounted root (ext2 filesystem) readonly.
<4>Freeing unused kernel memory: 112k freed
<6>Adding Swap: 787176k swap-space (priority -1)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started at Tue Aug 20 00:13:31 2002
Activating swap-devices in /etc/fstab...
doneChecking file systems...
Parallelizing fsck version 1.19a (13-Jul-2000)
/dev/hda3: clean, 96635/4898816 files, 539872/9787601 blocks
/dev/hda1: clean, 34/65536 files, 3097/65536 blocks
doneSetting up /lib/modules/2.4.4-4GBdone
Mounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
modprobe: modprobe: Can't locate module ext3
mount: fs type ext3 not supported by kernel
failedS01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
S01boot.crypto: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
/etc/init.d/rc3.d/S10nscd: : command not found
<notice>'/etc/init.d/rc3.d/S10nscd start' exits with status 0
<notice>/etc/init.d/rc3.d/S10quotad start
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: : command not found
/etc/init.d/rc3.d/S10quotad: /etc/rc.status: No such file or directory
<notice>'/etc/init.d/rc3.d/S10quotad start' exits with status 1
<notice>/etc/init.d/rc3.d/S20gpm start
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: : command not found
/etc/init.d/rc3.d/S20gpm: /etc/rc.status: No such file or directory
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
<notice>'/etc/init.d/rc3.d/S20gpm start' exits with status 1
<notice>/etc/init.d/rc3.d/S20inetd start
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: : command not found
/etc/init.d/rc3.d/S20inetd: /etc/rc.status: No such file or directory
<notice>'/etc/init.d/rc3.d/S20inetd start' exits with status 1
<notice>/etc/init.d/rc3.d/S22apache start
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: /etc/rc.status: No such file or directory
<notice>'/etc/init.d/rc3.d/S22apache start' exits with status 1
<notice>/etc/init.d/rc3.d/S80courier-imap start
Starting Courier-IMAP server:/usr/lib/courier-imap/libexec/authlib/authdaemond.ldap: error while loading shared libraries: libldap.so.1: cannot load shared object file: No such file or directory
imap
<notice>'/etc/init.d/rc3.d/S80courier-imap start' exits with status 0
<notice>/etc/init.d/rc3.d/S80qmail start
Starting qmail: svscan.
<notice>'/etc/init.d/rc3.d/S80qmail start' exits with status 0
<notice>/etc/init.d/rc3.d/S99usermin start
Starting Usermin server in /usr/libexec/usermin
<notice>'/etc/init.d/rc3.d/S99usermin start' exits with status 0
<notice>/etc/init.d/rc3.d/S99usermin_1 start
Starting Usermin server in /usr/libexec/usermin
Failed to bind port 20000 : Address already in use at /usr/libexec/usermin/miniserv.pl line 289.
<notice>'/etc/init.d/rc3.d/S99usermin_1 start' exits with status 98
<notice>/etc/init.d/rc3.d/S99webmin start
Starting Webmin server in /usr/libexec/webmin
Master Resource Control: runlevel 3 has been reached
Failed services in runlevel 3: idedma dhclient network proftpd syslog at fbset kbd mysql quota sendmail xntpd cron quotad gpm inetd apache
<notice>'/etc/init.d/rc3.d/S99webmin start' exits with status 0
<notice>killproc: kill(725,3)
/etc/init.d/rc3.d/S22apache: : command not found
/etc/init.d/rc3.d/S22apache: /etc/rc.status: No such file or directory
<notice>'/etc/init.d/rc3.d/S22apache start' exits with status 1
<notice>/etc/init.d/rc3.d/S80courier-imap start
Starting Courier-IMAP server:/usr/lib/courier-imap/libexec/authlib/authdaemond.ldap: error while loading shared libraries: libldap.so.1: cannot load shared object file: No such file or directory
imap
<notice>'/etc/init.d/rc3.d/S80courier-imap start' exits with status 0
<notice>/etc/init.d/rc3.d/S80qmail start
Starting qmail: svscan.
<notice>'/etc/init.d/rc3.d/S80qmail start' exits with status 0
<notice>/etc/init.d/rc3.d/S99usermin start
Starting Usermin server in /usr/libexec/usermin
<notice>'/etc/init.d/rc3.d/S99usermin start' exits with status 0
<notice>/etc/init.d/rc3.d/S99usermin_1 start
Starting Usermin server in /usr/libexec/usermin
Failed to bind port 20000 : Address already in use at /usr/libexec/usermin/miniserv.pl line 289.
<notice>'/etc/init.d/rc3.d/S99usermin_1 start' exits with status 98
<notice>/etc/init.d/rc3.d/S99webmin start
Starting Webmin server in /usr/libexec/webmin
Master Resource Control: runlevel 3 has been reached
Failed services in runlevel 3: idedma dhclient network proftpd syslog at fbset kbd mysql quota sendmail xntpd cron quotad gpm inetd apache
<notice>'/etc/init.d/rc3.d/S99webmin start' exits with status 0
<notice>killproc: kill(725,3)
Christian81
20.08.02, 08:19
Eventuell als kleine Hilfe: SuSE verwendet eine InitialRamdisk, evtl. fehlt die...
man kann si mit mk_initrd und anschliessenden lilo erzeugen. Was für ne SuSE-Version war davor drauf --> 2.4.4 = SuSE 7.2 soweit ich weiss...
wenn du /etc mounten kannst, mache ersteinmal in /etc/fstab aus ext3 überall ext2, kannst du später wieder umändern, eventuell liegt dort das Problem.
Powered by vBulletin® Version 4.2.5 Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.