Mr. Wolfenstein
17.02.05, 18:16
Hi. Ich versuche gerade einen Anonymous-FTP-Server aufzusetzen mit Lese- und
Schreibrechten. Da ich von Linux noch nicht viel Ahnung habe bin ich
natürlich nicht arg weit gekommen. Ich habe die /etc/proftpd.conf bearbeitet
und dann versucht den Server mit /usr/sbin/proftpd zu starte. Dabei kommen
diese Fehlermeldungen:
[root@linux homer]# /usr/sbin/proftpd
- warning: AuthPAMAuthoritative is deprecated
- getaddrinfo 'linux' error: Name or service not known
- warning: unable to determine IP address of 'linux'
- error: no valid servers configured
- Fatal: error processing configuration file '/etc/proftpd.conf'
[root@linux homer]#
Also die 2te und 3te Fehlermeldung kommt denk ich daher das ich die
/etc/hosts verändert habe da ich sonst nicht auf meinen Q3A-Server connecten
konnte. Diese sieht jets so aus:
127.0.0.1 localhost authorize.quake3arena.com
Aber die anderen Fehlermeldungen sagen mir eigentlich gar nichts. Ich hänge
mal die proftpd.conf unten an.
Danke im Voraus
P.S.: Oder gibt es einen anderen ftp-server der mal wirklich einfach ist.
Der hier soll laut anderen auch einfach sein aber unter einfach versteh ich
eigentlich bischen was anderes
# This is the ProFTPD configuration file
# $Id: proftpd.conf,v 1.1 2004/02/26 17:54:30 thias Exp $
ServerName "ProFTPD server"
ServerIdent on "FTP Server ready."
ServerAdmin root@localhost
ServerType standalone
#ServerType inetd
DefaultServer on
AccessGrantMsg "User %u logged in."
#DisplayConnect /etc/ftpissue
#DisplayLogin /etc/ftpmotd
#DisplayGoAway /etc/ftpgoaway
DeferWelcome off
# Use this to excude users from the chroot
DefaultRoot ~ !adm
# Use pam to authenticate by default
AuthPAMAuthoritative on
# Do not perform ident nor DNS lookups (hangs when the port is filtered)
IdentLookups off
UseReverseDNS off
# Port 21 is the standard FTP port.
Port 21
# Umask 022 is a good standard umask to prevent new dirs and files
# from being group and world writable.
Umask 022
# Default to show dot files in directory listings
ListOptions "-a"
# See Configuration.html for these (here are the default values)
#MultilineRFC2228 off
#RootLogin off
#LoginPasswordPrompt on
#MaxLoginAttempts 3
#MaxClientsPerHost none
#AllowForeignAddress off # For FXP
# Allow to resume not only the downloads but the uploads too
AllowRetrieveRestart on
AllowStoreRestart on
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 20
# Set the user and group that the server normally runs at.
#User homer
#Group homer
# This is where we want to put the pid file
#ScoreboardFile /var/run/proftpd.score
# Normally, we want users to do a few things.
<Global>
AllowOverwrite yes
<Limit ALL SITE_CHMOD>
AllowAll
</Limit>
</Global>
# Define the log formats
LogFormat default "%h %l %u %t \"%r\" %s %b"
LogFormat auth "%v [%P] %h %t \"%r\" %s"
# TLS
# Explained at http://www.castaglia.org/proftpd/modules/mod_tls.html
#TLSEngine on
#TLSRequired on
#TLSRSACertificateFile /usr/share/ssl/certs/proftpd.pem
#TLSRSACertificateKeyFile /usr/share/ssl/certs/proftpd.pem
#TLSCipherSuite ALL:!ADH:!DES
#TLSOptions NoCertRequest
#TLSVerifyClient off
##TLSRenegotiate ctrl 3600 data 512000 required off timeout 300
#TLSLog /var/log/proftpd/tls.log
# A basic anonymous configuration, with an upload directory.
<Anonymous ~ftp>
User ftp
Group ftp
# AccessGrantMsg "Anonymous login ok, restrictions apply."
# We want clients to be able to login with "anonymous" as well as "ftp"
UserAlias anonymous ftp
# Limit the maximum number of anonymous logins
MaxClients 10 "Sorry, max %m users -- try again later"
# Put the user into /pub right after login
DefaultChdir /home/homer/ftp
# We want 'welcome.msg' displayed at login, '.message' displayed in
# each newly chdired directory and tell users to read README* files.
# DisplayLogin /welcome.msg
# DisplayFirstChdir .message
# DisplayReadme README*
#
# # Some more cosmetic and not vital stuff
# DirFakeUser on ftpadm
# DirFakeGroup on ftpadm
#
# Limit WRITE everywhere in the anonymous chroot
<Limit WRITE SITE_CHMOD>
AllowAll
</Limit>
# # An upload directory that allows storing files but not retrieving
# # or creating directories.
# <Directory uploads/*>
# AllowOverwrite no
# <Limit READ>
# DenyAll
# </Limit>
#
# <Limit STOR>
# AllowAll
# </Limit>
# </Directory>
#
# # Don't write anonymous accesses to the system wtmp file (good idea!)
# WtmpLog off
#
# # Logging for the anonymous transfers
# ExtendedLog /var/log/proftpd/access.log WRITE,READ default
# ExtendedLog /var/log/proftpd/auth.log AUTH auth
#
#</Anonymous>
Schreibrechten. Da ich von Linux noch nicht viel Ahnung habe bin ich
natürlich nicht arg weit gekommen. Ich habe die /etc/proftpd.conf bearbeitet
und dann versucht den Server mit /usr/sbin/proftpd zu starte. Dabei kommen
diese Fehlermeldungen:
[root@linux homer]# /usr/sbin/proftpd
- warning: AuthPAMAuthoritative is deprecated
- getaddrinfo 'linux' error: Name or service not known
- warning: unable to determine IP address of 'linux'
- error: no valid servers configured
- Fatal: error processing configuration file '/etc/proftpd.conf'
[root@linux homer]#
Also die 2te und 3te Fehlermeldung kommt denk ich daher das ich die
/etc/hosts verändert habe da ich sonst nicht auf meinen Q3A-Server connecten
konnte. Diese sieht jets so aus:
127.0.0.1 localhost authorize.quake3arena.com
Aber die anderen Fehlermeldungen sagen mir eigentlich gar nichts. Ich hänge
mal die proftpd.conf unten an.
Danke im Voraus
P.S.: Oder gibt es einen anderen ftp-server der mal wirklich einfach ist.
Der hier soll laut anderen auch einfach sein aber unter einfach versteh ich
eigentlich bischen was anderes
# This is the ProFTPD configuration file
# $Id: proftpd.conf,v 1.1 2004/02/26 17:54:30 thias Exp $
ServerName "ProFTPD server"
ServerIdent on "FTP Server ready."
ServerAdmin root@localhost
ServerType standalone
#ServerType inetd
DefaultServer on
AccessGrantMsg "User %u logged in."
#DisplayConnect /etc/ftpissue
#DisplayLogin /etc/ftpmotd
#DisplayGoAway /etc/ftpgoaway
DeferWelcome off
# Use this to excude users from the chroot
DefaultRoot ~ !adm
# Use pam to authenticate by default
AuthPAMAuthoritative on
# Do not perform ident nor DNS lookups (hangs when the port is filtered)
IdentLookups off
UseReverseDNS off
# Port 21 is the standard FTP port.
Port 21
# Umask 022 is a good standard umask to prevent new dirs and files
# from being group and world writable.
Umask 022
# Default to show dot files in directory listings
ListOptions "-a"
# See Configuration.html for these (here are the default values)
#MultilineRFC2228 off
#RootLogin off
#LoginPasswordPrompt on
#MaxLoginAttempts 3
#MaxClientsPerHost none
#AllowForeignAddress off # For FXP
# Allow to resume not only the downloads but the uploads too
AllowRetrieveRestart on
AllowStoreRestart on
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 20
# Set the user and group that the server normally runs at.
#User homer
#Group homer
# This is where we want to put the pid file
#ScoreboardFile /var/run/proftpd.score
# Normally, we want users to do a few things.
<Global>
AllowOverwrite yes
<Limit ALL SITE_CHMOD>
AllowAll
</Limit>
</Global>
# Define the log formats
LogFormat default "%h %l %u %t \"%r\" %s %b"
LogFormat auth "%v [%P] %h %t \"%r\" %s"
# TLS
# Explained at http://www.castaglia.org/proftpd/modules/mod_tls.html
#TLSEngine on
#TLSRequired on
#TLSRSACertificateFile /usr/share/ssl/certs/proftpd.pem
#TLSRSACertificateKeyFile /usr/share/ssl/certs/proftpd.pem
#TLSCipherSuite ALL:!ADH:!DES
#TLSOptions NoCertRequest
#TLSVerifyClient off
##TLSRenegotiate ctrl 3600 data 512000 required off timeout 300
#TLSLog /var/log/proftpd/tls.log
# A basic anonymous configuration, with an upload directory.
<Anonymous ~ftp>
User ftp
Group ftp
# AccessGrantMsg "Anonymous login ok, restrictions apply."
# We want clients to be able to login with "anonymous" as well as "ftp"
UserAlias anonymous ftp
# Limit the maximum number of anonymous logins
MaxClients 10 "Sorry, max %m users -- try again later"
# Put the user into /pub right after login
DefaultChdir /home/homer/ftp
# We want 'welcome.msg' displayed at login, '.message' displayed in
# each newly chdired directory and tell users to read README* files.
# DisplayLogin /welcome.msg
# DisplayFirstChdir .message
# DisplayReadme README*
#
# # Some more cosmetic and not vital stuff
# DirFakeUser on ftpadm
# DirFakeGroup on ftpadm
#
# Limit WRITE everywhere in the anonymous chroot
<Limit WRITE SITE_CHMOD>
AllowAll
</Limit>
# # An upload directory that allows storing files but not retrieving
# # or creating directories.
# <Directory uploads/*>
# AllowOverwrite no
# <Limit READ>
# DenyAll
# </Limit>
#
# <Limit STOR>
# AllowAll
# </Limit>
# </Directory>
#
# # Don't write anonymous accesses to the system wtmp file (good idea!)
# WtmpLog off
#
# # Logging for the anonymous transfers
# ExtendedLog /var/log/proftpd/access.log WRITE,READ default
# ExtendedLog /var/log/proftpd/auth.log AUTH auth
#
#</Anonymous>