Wormi
24.09.04, 15:22
Hi und hallo,
ich will den Traffic auf meinem Server überwachen und habe mir dafür MRTG ausgesucht. Jedoch bekomme ich beim erstellen der Config-Datei ne Fehlermeldung. Hoffe ihr könnt mir weiter helfen und sagen was da fischig ist. Kann auch sein, dass ich nen falschen Befehl eingebe.
SNMP Error:
no response received
xxx.xxx.xxx.xxx:/home/user# cfgmaker I-SEC@127.0.0.1 > mrtg.cfg
--base: Get Device Info on I-SEC@127.0.0.1:
SNMP Error:
no response received
SNMPv1_Session (remote host: "127.0.0.1" [127.0.0.1].161)
community: "I-SEC"
request ID: -504869872
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/lib/perl5/SNMP_util.pm line 456
SNMPGET Problem for sysDescr sysContact sysName sysLocation sysObjectID on I-SEC@127.0.0.1:
at /usr/bin/cfgmaker line 657
--base: Vendor Id:
--base: Populating confcache
--snpo: Skipping ifName scanning because I-SEC@127.0.0.1: does not seem to support it
--snpo: Skipping ifDescr scanning because I-SEC@127.0.0.1: does not seem to support it
--snpo: Skipping ipAdEntIfIndex scanning because I-SEC@127.0.0.1: does not seem to support it
--snpo: Skipping ifType scanning because I-SEC@127.0.0.1: does not seem to support it
--snpo: Skipping ifPhysAddress scanning because I-SEC@127.0.0.1: does not seem to support it
--base: Get Interface Info
--base: Walking ifIndex
SNMP Error:
no response received
SNMPv1_Session (remote host: "127.0.0.1" [127.0.0.1].161)
community: "I-SEC"
request ID: -504869866
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/lib/perl5/SNMP_util.pm line 569
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.1 on I-SEC@127.0.0.1:
at /usr/bin/cfgmaker line 107
--base: Walking ifType
SNMP Error:
no response received
SNMPv1_Session (remote host: "127.0.0.1" [127.0.0.1].161)
community: "I-SEC"
request ID: -504869865
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/lib/perl5/SNMP_util.pm line 569
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.3 on I-SEC@127.0.0.1:
at /usr/bin/cfgmaker line 107
--base: Walking ifSpeed
SNMP Error:
no response received
SNMPv1_Session (remote host: "127.0.0.1" [127.0.0.1].161)
community: "I-SEC"
request ID: -504869864
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/lib/perl5/SNMP_util.pm line 569
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.5 on I-SEC@127.0.0.1:
at /usr/bin/cfgmaker line 107
--base: Walking ifAdminStatus
SNMP Error:
no response received
SNMPv1_Session (remote host: "127.0.0.1" [127.0.0.1].161)
community: "I-SEC"
request ID: -504869863
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/lib/perl5/SNMP_util.pm line 569
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.7 on I-SEC@127.0.0.1:
at /usr/bin/cfgmaker line 107
--base: Walking ifOperStatus
SNMP Error:
no response received
SNMPv1_Session (remote host: "127.0.0.1" [127.0.0.1].161)
community: "I-SEC"
request ID: -504869862
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/lib/perl5/SNMP_util.pm line 569
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.8 on I-SEC@127.0.0.1:
at /usr/bin/cfgmaker line 107
ich will den Traffic auf meinem Server überwachen und habe mir dafür MRTG ausgesucht. Jedoch bekomme ich beim erstellen der Config-Datei ne Fehlermeldung. Hoffe ihr könnt mir weiter helfen und sagen was da fischig ist. Kann auch sein, dass ich nen falschen Befehl eingebe.
SNMP Error:
no response received
xxx.xxx.xxx.xxx:/home/user# cfgmaker I-SEC@127.0.0.1 > mrtg.cfg
--base: Get Device Info on I-SEC@127.0.0.1:
SNMP Error:
no response received
SNMPv1_Session (remote host: "127.0.0.1" [127.0.0.1].161)
community: "I-SEC"
request ID: -504869872
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/lib/perl5/SNMP_util.pm line 456
SNMPGET Problem for sysDescr sysContact sysName sysLocation sysObjectID on I-SEC@127.0.0.1:
at /usr/bin/cfgmaker line 657
--base: Vendor Id:
--base: Populating confcache
--snpo: Skipping ifName scanning because I-SEC@127.0.0.1: does not seem to support it
--snpo: Skipping ifDescr scanning because I-SEC@127.0.0.1: does not seem to support it
--snpo: Skipping ipAdEntIfIndex scanning because I-SEC@127.0.0.1: does not seem to support it
--snpo: Skipping ifType scanning because I-SEC@127.0.0.1: does not seem to support it
--snpo: Skipping ifPhysAddress scanning because I-SEC@127.0.0.1: does not seem to support it
--base: Get Interface Info
--base: Walking ifIndex
SNMP Error:
no response received
SNMPv1_Session (remote host: "127.0.0.1" [127.0.0.1].161)
community: "I-SEC"
request ID: -504869866
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/lib/perl5/SNMP_util.pm line 569
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.1 on I-SEC@127.0.0.1:
at /usr/bin/cfgmaker line 107
--base: Walking ifType
SNMP Error:
no response received
SNMPv1_Session (remote host: "127.0.0.1" [127.0.0.1].161)
community: "I-SEC"
request ID: -504869865
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/lib/perl5/SNMP_util.pm line 569
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.3 on I-SEC@127.0.0.1:
at /usr/bin/cfgmaker line 107
--base: Walking ifSpeed
SNMP Error:
no response received
SNMPv1_Session (remote host: "127.0.0.1" [127.0.0.1].161)
community: "I-SEC"
request ID: -504869864
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/lib/perl5/SNMP_util.pm line 569
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.5 on I-SEC@127.0.0.1:
at /usr/bin/cfgmaker line 107
--base: Walking ifAdminStatus
SNMP Error:
no response received
SNMPv1_Session (remote host: "127.0.0.1" [127.0.0.1].161)
community: "I-SEC"
request ID: -504869863
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/lib/perl5/SNMP_util.pm line 569
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.7 on I-SEC@127.0.0.1:
at /usr/bin/cfgmaker line 107
--base: Walking ifOperStatus
SNMP Error:
no response received
SNMPv1_Session (remote host: "127.0.0.1" [127.0.0.1].161)
community: "I-SEC"
request ID: -504869862
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/lib/perl5/SNMP_util.pm line 569
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.8 on I-SEC@127.0.0.1:
at /usr/bin/cfgmaker line 107