dvd-laufwerk einbinden ?

[Alucard]

ich benutzte Slackware 9.1 und hab das problem das in der /etc/fstab mein dvd-laufwerk nicht eingestellt ist,was muß ich denn da alles einstellen um mein dvd-laufwerk verfügbar zu machen ? meine /etc/fstab siet so aus

/dev/hda2 swap swap defaults 0 0
/dev/hda1 / reiserfs defaults 1 1
/dev/cdrom /mnt/cdrom iso9660 noauto,user,ro 0 0
/dev/fd0 /mnt/floppy auto noauto,owner 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
proc /proc proc defaults 0 0

also wie soll die aussehen damit mein dvd-laufwerk funktioniert ?

[soenke]

Moin,

wo befindet sich denn Dein DVD-Laufwerk?

Am 1. Slave, 2. Master oder 2. Slave?

Beste Grüße
Sönke

[Alucard]

das ist ne gute frage,das dvd-laufwerk war bei dem PC schon dabei deswegen hab ich da nie nachgeschaut :confused:

[soenke]

Das bekommen wir schon noch raus. :)

Poste bitte mal die Ausgabe von 'dmesg'.


Beste Grüße
Sönke

[Alucard]

also hier ist die aussage

Linux version 2.4.22 (root@midas) (gcc version 3.2.3) #6 Tue Sep 2 17:43:01 PDT 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Linux ro root=301
Initializing CPU#0
Detected 1333.119 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 2660.76 BogoMIPS
Memory: 256044k/262080k available (1813k kernel code, 5648k reserved, 614k data, 116k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU: AMD Athlon(tm) XP 1500+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb230, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1106/3099] at 00:00.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
vesafb: framebuffer at 0xd0000000, mapped to 0xd080d000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:c2d0
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1
ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:DMA
hda: MAXTOR 4K040H2, ATA DISK drive
blk: queue c03a9d80, I/O limit 4095Mb (mask 0xffffffff)
hdc: LITE-ON LTR-32123S, ATAPI CD/DVD-ROM drive
hdd: SAMSUNG DVD-ROM SD-616F, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78198750 sectors (40038 MB) w/2000KiB Cache, CHS=4867/255/63, UDMA(100)
hdc: attached ide-cdrom driver.
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
hdd: attached ide-cdrom driver.
hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Partition check:
hda: hda1 hda2
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 1911.200 MB/sec
32regs : 1099.200 MB/sec
pIII_sse : 3664.800 MB/sec
pII_mmx : 3121.600 MB/sec
p5_mmx : 3982.800 MB/sec
raid5: using function: pIII_sse (3664.800 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.5+(22/07/2002)
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
FAT: bogus logical sector size 0
UMSDOS: msdos_read_super failed, mount aborted.
FAT: bogus logical sector size 0
FAT: bogus logical sector size 0
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,1)) ...
for (ide0(3,1))
ide0(3,1):Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 116k freed
Adding Swap: 1012084k swap-space (priority -1)
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Detected Via Apollo Pro KT266 chipset
agpgart: AGP aperture is 64M @ 0xd8000000
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
PCI: Setting latency timer of device 00:11.5 to 64
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
uhci.c: USB UHCI at I/O 0xa800, IRQ 11
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: USB UHCI at I/O 0xac00, IRQ 11
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 Fast Ethernet at 0xd0d32000, 00:30:84:75:75:8b, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139C'
hub.c: new USB device 00:11.2-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x3f0/0x1604) is not claimed by any active driver.
usb.c: registered new driver usblp
printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1604
printer.c: v0.11: USB Printer Device Class driver
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4496 Wed Jul 16 19:03:09 PDT 2003
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: RRIP_1991A
ALSA ../alsa-kernel/pci/via82xx.c:503: codec_valid: codec 0 is not valid [0xac0000]


ist ein zimlich langes teil,na ich hoffe ihr werdet daraus schlau ich steh noch etwas wacklig auf denn beinen was das system von Linux angeht aber naja,das mit dem DVD-Laufwerk dürfte doch kein großes problem sein oder ?

[soenke]

....
hda: MAXTOR 4K040H2, ATA DISK drive
blk: queue c03a9d80, I/O limit 4095Mb (mask 0xffffffff)
hdc: LITE-ON LTR-32123S, ATAPI CD/DVD-ROM drive
hdd: SAMSUNG DVD-ROM SD-616F, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
........

Das fett gedruckte ist Dein DVD-Laufwerk.

Also fügst Du folgende Zeile in die /etc/fstab ein:
/dev/hdd /mnt/dvd iso9660 noauto,user,ro 0 0

Das Verzeichnis /mnt/dvd muss existieren.