tubby
18.10.03, 19:00
Hallo zusammen!
Ich hab diese Anfrage schon mal im Hardware-Forum gestellt. Da ich dort aber keine Antwort bekommen habe (ist vielleicht nicht ganz das richtige Forum) versuch ich's hier nochmal:
Das is vermutlich nicht die intelligenteste Frage heute, aber ich steh hier irgendwie auf dem Schlauch:
Ich hab versucht unter Suse 8.1 meinen Fasttrack100 IDE-Raid-Controller (onboard auf dem Asus A7V) mit zwei 160GB Platten Raid 1 zum Laufen zu bringen. (also in ein bestehendes System einzubinden)
Im Bios des Controllers wird das Array auch wunderbar als Aktiv angezeigt.
Ich hab mir dann noch den Treiber von der Promise-Seite gezogen und nach Anleitung mit "sh install" von Diskette installiert. (gab auch ne Erfolgsmeldung)
Vorsicht jetzt kommt die blöde Frage: Wie kann ich das Array jetzt ansprechen um mit fdisk eine Partition drauf zu erstellen? (/dev/???)
Und vielleicht vorher noch: Wie kann ich erkennen, ob das mit dem Treiber einbinden funktioniert hat?
Hier mal meine /var/log/boot.msg:
Inspecting /boot/System.map-2.4.19-4GB
Loaded 14220 symbols from /boot/System.map-2.4.19-4GB.
Symbols match kernel version 2.4.19.
Loaded 90 symbols from 6 modules.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.4.19-4GB (root@Athlon.suse.de) (gcc version 3.2) #1 Tue Oct 15 02:57:46 UTC 2002
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
<4> BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000000ffec000 (usable)
<4> BIOS-e820: 000000000ffec000 - 000000000ffef000 (ACPI data)
<4> BIOS-e820: 000000000ffef000 - 000000000ffff000 (reserved)
<4> BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<5>255MB LOWMEM available.
<7>ACPI: have wakeup address 0xc0001000
<6>Advanced speculative caching feature not present
<4>On node 0 totalpages: 65516
<4>zone(0): 4096 pages.
<4>zone(1): 61420 pages.
<4>zone(2): 0 pages.
<6>ACPI: RSDP (v000 ASUS ) @ 0x000f6a90
<6>ACPI: RSDT (v001 ASUS A7V 12336.12337) @ 0x0ffec000
<6>ACPI: FADT (v001 ASUS A7V 12336.12337) @ 0x0ffec080
<6>ACPI: BOOT (v001 ASUS A7V 12336.12337) @ 0x0ffec040
<4>ACPI: MADT not present
<4>Building zonelist for node : 0
<4>Kernel command line: root=/dev/hda3 vga=791 ide0=0x1f0,0x3f6,14 ide1=0x170,0x376,15 ide2=0 ide3=0 ide4=0 ide5=0 ide6=0 ide7=0 ide8=0 ide9=0
<4>ide_setup: ide0=0x1f0,0x3f6,14
<4>
<4>ide_setup: ide1=0x170,0x376,15
<4>
<4>ide_setup: ide2=0
<4>
<4>ide_setup: ide3=0
<4>
<4>ide_setup: ide4=0
<4>
<4>ide_setup: ide5=0
<4>
<4>ide_setup: ide6=0
<4>
<4>ide_setup: ide7=0
<4>
<4>ide_setup: ide8=0
<4>
<4>ide_setup: ide9=0
<4>
<6>Initializing CPU#0
<4>Detected 1008.990 MHz processor.
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 2011.95 BogoMIPS
<6>Memory: 255376k/262064k available (1685k kernel code, 6292k reserved, 413k data, 164k init, 0k highmem)
<6>Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
<6>Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<4>Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
<7>CPU: Before vendor init, caps: 0183f9ff c1c7f9ff 00000000, vendor = 2
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 256K (64 bytes/line)
<7>CPU: After vendor init, caps: 0183f9ff c1c7f9ff 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000
<7>CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000
<4>CPU: AMD Athlon(tm) Processor stepping 02
<6>Enabling fast FPU save and restore... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<6>ACPI: Subsystem revision 20020829
<6>PCI: PCI BIOS revision 2.10 entry at 0xf1180, last bus=1
<6>PCI: Using configuration type 1
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: System [ACPI] (supports S0 S1 S4 S5)
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<3>Unknown bridge resource 0: assuming transparent
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>PCI: Probing PCI hardware
<6>PCI: Using IRQ router VIA [1106/0686] at 00:04.0
<6>PCI: Disabling Via external APIC routing
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
<5>apm: overridden by ACPI.
<4>Starting kswapd
<4>bigpage subsystem: allocated 0 bigpages (=0MB).
<4>kinoded started
<5>VFS: Diskquotas version dquot_6.5.0 initialized
<5>aio_setup: num_physpages = 16379
<5>aio_setup: sizeof(struct page) = 48
<6>vesafb: framebuffer at 0xe5000000, mapped to 0xd0817000, size 4096k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=1
<6>vesafb: protected mode interface info at c000:7b00
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>Looking for splash picture... no good signature found.
<4>Console: switching to colour frame buffer device 128x48
<6>fb0: VESA VGA frame buffer device
<6>Detected PS/2 Mouse Port.
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>Real Time Clock Driver v1.10e
<6>Uniform Multi-Platform E-IDE driver Revision: 6.31
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<4>VP_IDE: IDE controller on PCI bus 00 dev 21
<4>VP_IDE: chipset revision 16
<4>VP_IDE: not 100%% native mode: will probe irqs later
<6>VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:04.1
<4> ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hdaMA, hdbMA
<4> ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdcio, hddMA
<4>PDC20265: IDE controller on PCI bus 00 dev 88
<6>PCI: Found IRQ 10 for device 00:11.0
<6>PCI: Sharing IRQ 10 with 00:0b.0
<4>PDC20265: chipset revision 2
<4>PDC20265: not 100%% native mode: will probe irqs later
<4>PDC20265: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER Mode.
<4>PDC20265: too many IDE interfaces, no room in table
<4>PDC20265: too many IDE interfaces, no room in table
<4>PDC20265: neither IDE port enabled (BIOS)
<4>hda: IBM-DJNA-351520, ATA DISK drive
<4>hdb: WDC WD400BB-00DEA0, ATA DISK drive
<4>hdd: Maxtor 93073U6, ATA DISK drive
<4>ide2: ports already in use, skipping probe
<4>ide3: ports already in use, skipping probe
<4>ide4: ports already in use, skipping probe
<4>ide5: ports already in use, skipping probe
<4>ide6: ports already in use, skipping probe
<4>ide7: ports already in use, skipping probe
<4>ide8: ports already in use, skipping probe
<4>ide9: ports already in use, skipping probe
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>blk: queue c039c904, I/O limit 4095Mb (mask 0xffffffff)
<4>hda: safely enabled flush
<6>hda: 30033360 sectors (15377 MB) w/430KiB Cache, CHS=1869/255/63, (U)DMA
<4>blk: queue c039ca4c, I/O limit 4095Mb (mask 0xffffffff)
<4>hdb: safely enabled flush
<6>hdb: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(66)
<4>blk: queue c039cda8, I/O limit 4095Mb (mask 0xffffffff)
<4>hdd: safely enabled flush
<6>hdd: 60030432 sectors (30736 MB) w/2048KiB Cache, CHS=59554/16/63, UDMA(33)
<4>ide-floppy driver 0.99.newide
<6>Partition check:
<6> hda: [DM6DO] [remap +63] [1869/255/63] hda1 hda2 hda3
<6> hdb: hdb1
<6> hdd: hdd1
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 16 devices)
<6>Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
<6>Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
<4>ide-floppy driver 0.99.newide
<6>SCSI subsystem driver Revision: 1.00
<3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<6>IP: routing cache hash table of 2048 buckets, 16Kbytes
<6>TCP: Hash tables configured (established 16384 bind 32768)
<6>Linux IP multicast router 0.06 plus PIM-SM
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<5>RAMDISK: Compressed image found at block 0
<6>Freeing initrd memory: 398k freed
<4>VFS: Mounted root (ext2 filesystem).
<4>reiserfs: found format "3.6" with standard journal
<4>reiserfs: checking transaction log (ide0(3,3)) for (ide0(3,3))
<4>reiserfs: using ordered data mode
<4>Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<6>Freeing unused kernel memory: 164k freed
<4>PROMISE FastTrak Series Linux Driver Version 1.03.0.1
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>LVM version 1.0.5(mp-v6)(15/07/2002) module loaded
<6>Adding Swap: 2097136k swap-space (priority 42)
<4>EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Mon Oct 13 22:09:35 2003
Configuring serial ports...
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
doneRun file system check on root for LVM activation
doneRemounting root file system (/) read/write for vgscan...
Scanning for LVM volume groups...
vgscan -- reading all physical volumes (this may take a while...)
vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
vgscan -- WARNING: This program does not do a VGDA backup of your volume group
Activating LVM volume groups...
vgchange -- no volume groups found
done
Activating swap-devices in /etc/fstab...
doneChecking file systems...
fsck 1.28 (31-Aug-2002)
Reiserfs super block in block 16 on 0x303 of format 3.6 with standard journal
Blocks (total/free): 2719001/2542849 by 4096 bytes
Filesystem is clean
/dev/hda1: clean, 35/6024 files, 5710/24066 blocks
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hda1 on /boot type ext2 (rw)
mount: you didn't specify a filesystem type for /dev/hdd1
I will try type ext2
/dev/hdd1 on /media/video type ext2 (rw,nosuid,nodev)
mount: you didn't specify a filesystem type for /dev/hdb1
I will try type vfat
/dev/hdb1 on /media/mldonkey type vfat (rw,noexec,nosuid,nodev,uid=500)
doneRestore device permissions
done
Activating remaining swap-devices in /etc/fstab...
doneMounting shared memory FS on /dev/shm
done
Setting up the CMOS clock
done
Setting up timezone data
done
Setting up hostname 'linux'
done
Setting up loopback interface
done
Enabling syn flood protection
done
Disabling IP forwarding
done
Creating /var/log/boot.msg
done<notice>killproc: kill(29,29)
Running /etc/init.d/boot.local
Boot logging started on /dev/tty1(/dev/console) at Mon Oct 13 22:09:44 2003
Master Resource Control: previous runlevel: N, switching to runlevel:
3
Initializing random number generator
done
Setting up network interfaces:
lo
done<notice>killproc: kill(29,3)
INIT: Entering runlevel: 3
<notice>/etc/init.d/rc3.d/S01random start
<notice>'/etc/init.d/rc3.d/S01random start' exits with status 0
<notice>/etc/init.d/rc3.d/S05network start
done
eth0 IP/Netmask: 192.168.0.7 / 255.255.255.0
done
Starting syslog services<notice>'/etc/init.d/rc3.d/S05network start' exits with status 0
<notice>/etc/init.d/rc3.d/S06syslog start
<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/dhcp/dev/log ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
Starting hotplugging services [<notice>'/etc/init.d/rc3.d/S06syslog start' exits with status 0
<notice>/etc/init.d/rc3.d/S07hotplug start
net pci usb .. ]
done
<notice>'/etc/init.d/rc3.d/S07hotplug start' exits with status 0
<notice>/etc/init.d/rc3.d/S09lircd start
Starting daemon lircd<notice>startproc: execve (/usr/local/sbin/lircd) [ /usr/local/sbin/lircd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/local/sbin/lircd ]
done
<notice>'/etc/init.d/rc3.d/S09lircd start' exits with status 0
<notice>/etc/init.d/rc3.d/S09nmb start
Starting Samba classic NMB daemon<notice>startproc: execve (/usr/lib/samba/classic/nmbd) [ /usr/lib/samba/classic/nmbd -D ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/lib/samba/classic/nmbd ]
done
Starting RPC portmap daemon<notice>'/etc/init.d/rc3.d/S09nmb start' exits with status 0
<notice>/etc/init.d/rc3.d/S09portmap start
done
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/sbin/portmap ]
<notice>'/etc/init.d/rc3.d/S09portmap start' exits with status 0
<notice>/etc/init.d/rc3.d/S09sshd start
Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
done
<notice>'/etc/init.d/rc3.d/S09sshd start' exits with status 0
<notice>/etc/init.d/rc3.d/S10postfix start
Starting mail service (Postfix)
done
<notice>'/etc/init.d/rc3.d/S10postfix start' exits with status 0
Mount SMB File System
unused
Starting sound driver<notice>/etc/init.d/rc3.d/S10smbfs start
<notice>checkproc: /usr/lib/samba/classic/nmbd 555
<notice>'/etc/init.d/rc3.d/S10smbfs start' exits with status 0
<notice>/etc/init.d/rc3.d/S13alsasound start
done
Starting service at daemon<notice>'/etc/init.d/rc3.d/S13alsasound start' exits with status 0
<notice>/etc/init.d/rc3.d/S13atd start
<notice>startproc: execve (/usr/sbin/atd) [ /usr/sbin/atd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/atd ]
done
Starting CRON daemon<notice>'/etc/init.d/rc3.d/S13atd start' exits with status 0
<notice>/etc/init.d/rc3.d/S13cron start
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
done
<notice>'/etc/init.d/rc3.d/S13cron start' exits with status 0
<notice>/etc/init.d/rc3.d/S13dhcpd start
Starting DHCP server <notice>startproc: execve (/usr/sbin/dhcpd) [ /usr/sbin/dhcpd -chroot /var/lib/dhcp/ -lf /dhcpd.leases -user nobody -group nogroup eth0 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/dhcpd ]
[chroot]
done
<notice>'/etc/init.d/rc3.d/S13dhcpd start' exits with status 0
<notice>/etc/init.d/rc3.d/S13fbset start
<notice>'/etc/init.d/rc3.d/S13fbset start' exits with status 0
<notice>/etc/init.d/rc3.d/S13nscd start
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
<notice>'/etc/init.d/rc3.d/S13nscd start' exits with status 0
<notice>/etc/init.d/rc3.d/S13rpmconfigcheck start
<notice>'/etc/init.d/rc3.d/S13rpmconfigcheck start' exits with status 0
<notice>/etc/init.d/rc3.d/S14kbd start
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneKeyboard: Typematic Rate set to 24.0 cps (delay = 500 ms)
doneLoading compose table winkeys shiftctrl latin1.add
done
Loading console font lat9w-16.psfu
doneLoading screenmap trivial
doneSetting up console ttys
done<notice>'/etc/init.d/rc3.d/S14kbd start' exits with status 0
<notice>/etc/init.d/rc3.d/S14smb start
<notice>Starting Samba classic SMB daemoncheckproc: /usr/lib/samba/classic/nmbd 555
<notice>startproc: execve (/usr/lib/samba/classic/smbd) [ /usr/lib/samba/classic/smbd -D ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh TMPDIR=/var/tmp INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/lib/samba/classic/smbd ]
done
Starting hardware scan on boot<notice>'/etc/init.d/rc3.d/S14smb start' exits with status 0
<notice>/etc/init.d/rc3.d/S15hwscan start
<notice>Starting inetd'/etc/init.d/rc3.d/S15hwscan start' exits with status 0
<notice>/etc/init.d/rc3.d/S20inetd start
<notice>startproc: execve (/usr/sbin/inetd) [ /usr/sbin/inetd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/inetd ]
done
Ich hab diese Anfrage schon mal im Hardware-Forum gestellt. Da ich dort aber keine Antwort bekommen habe (ist vielleicht nicht ganz das richtige Forum) versuch ich's hier nochmal:
Das is vermutlich nicht die intelligenteste Frage heute, aber ich steh hier irgendwie auf dem Schlauch:
Ich hab versucht unter Suse 8.1 meinen Fasttrack100 IDE-Raid-Controller (onboard auf dem Asus A7V) mit zwei 160GB Platten Raid 1 zum Laufen zu bringen. (also in ein bestehendes System einzubinden)
Im Bios des Controllers wird das Array auch wunderbar als Aktiv angezeigt.
Ich hab mir dann noch den Treiber von der Promise-Seite gezogen und nach Anleitung mit "sh install" von Diskette installiert. (gab auch ne Erfolgsmeldung)
Vorsicht jetzt kommt die blöde Frage: Wie kann ich das Array jetzt ansprechen um mit fdisk eine Partition drauf zu erstellen? (/dev/???)
Und vielleicht vorher noch: Wie kann ich erkennen, ob das mit dem Treiber einbinden funktioniert hat?
Hier mal meine /var/log/boot.msg:
Inspecting /boot/System.map-2.4.19-4GB
Loaded 14220 symbols from /boot/System.map-2.4.19-4GB.
Symbols match kernel version 2.4.19.
Loaded 90 symbols from 6 modules.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.4.19-4GB (root@Athlon.suse.de) (gcc version 3.2) #1 Tue Oct 15 02:57:46 UTC 2002
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
<4> BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000000ffec000 (usable)
<4> BIOS-e820: 000000000ffec000 - 000000000ffef000 (ACPI data)
<4> BIOS-e820: 000000000ffef000 - 000000000ffff000 (reserved)
<4> BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<5>255MB LOWMEM available.
<7>ACPI: have wakeup address 0xc0001000
<6>Advanced speculative caching feature not present
<4>On node 0 totalpages: 65516
<4>zone(0): 4096 pages.
<4>zone(1): 61420 pages.
<4>zone(2): 0 pages.
<6>ACPI: RSDP (v000 ASUS ) @ 0x000f6a90
<6>ACPI: RSDT (v001 ASUS A7V 12336.12337) @ 0x0ffec000
<6>ACPI: FADT (v001 ASUS A7V 12336.12337) @ 0x0ffec080
<6>ACPI: BOOT (v001 ASUS A7V 12336.12337) @ 0x0ffec040
<4>ACPI: MADT not present
<4>Building zonelist for node : 0
<4>Kernel command line: root=/dev/hda3 vga=791 ide0=0x1f0,0x3f6,14 ide1=0x170,0x376,15 ide2=0 ide3=0 ide4=0 ide5=0 ide6=0 ide7=0 ide8=0 ide9=0
<4>ide_setup: ide0=0x1f0,0x3f6,14
<4>
<4>ide_setup: ide1=0x170,0x376,15
<4>
<4>ide_setup: ide2=0
<4>
<4>ide_setup: ide3=0
<4>
<4>ide_setup: ide4=0
<4>
<4>ide_setup: ide5=0
<4>
<4>ide_setup: ide6=0
<4>
<4>ide_setup: ide7=0
<4>
<4>ide_setup: ide8=0
<4>
<4>ide_setup: ide9=0
<4>
<6>Initializing CPU#0
<4>Detected 1008.990 MHz processor.
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 2011.95 BogoMIPS
<6>Memory: 255376k/262064k available (1685k kernel code, 6292k reserved, 413k data, 164k init, 0k highmem)
<6>Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
<6>Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<4>Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
<7>CPU: Before vendor init, caps: 0183f9ff c1c7f9ff 00000000, vendor = 2
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 256K (64 bytes/line)
<7>CPU: After vendor init, caps: 0183f9ff c1c7f9ff 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000
<7>CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000
<4>CPU: AMD Athlon(tm) Processor stepping 02
<6>Enabling fast FPU save and restore... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<6>ACPI: Subsystem revision 20020829
<6>PCI: PCI BIOS revision 2.10 entry at 0xf1180, last bus=1
<6>PCI: Using configuration type 1
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: System [ACPI] (supports S0 S1 S4 S5)
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<3>Unknown bridge resource 0: assuming transparent
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>PCI: Probing PCI hardware
<6>PCI: Using IRQ router VIA [1106/0686] at 00:04.0
<6>PCI: Disabling Via external APIC routing
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
<5>apm: overridden by ACPI.
<4>Starting kswapd
<4>bigpage subsystem: allocated 0 bigpages (=0MB).
<4>kinoded started
<5>VFS: Diskquotas version dquot_6.5.0 initialized
<5>aio_setup: num_physpages = 16379
<5>aio_setup: sizeof(struct page) = 48
<6>vesafb: framebuffer at 0xe5000000, mapped to 0xd0817000, size 4096k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=1
<6>vesafb: protected mode interface info at c000:7b00
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>Looking for splash picture... no good signature found.
<4>Console: switching to colour frame buffer device 128x48
<6>fb0: VESA VGA frame buffer device
<6>Detected PS/2 Mouse Port.
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>Real Time Clock Driver v1.10e
<6>Uniform Multi-Platform E-IDE driver Revision: 6.31
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<4>VP_IDE: IDE controller on PCI bus 00 dev 21
<4>VP_IDE: chipset revision 16
<4>VP_IDE: not 100%% native mode: will probe irqs later
<6>VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:04.1
<4> ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hdaMA, hdbMA
<4> ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdcio, hddMA
<4>PDC20265: IDE controller on PCI bus 00 dev 88
<6>PCI: Found IRQ 10 for device 00:11.0
<6>PCI: Sharing IRQ 10 with 00:0b.0
<4>PDC20265: chipset revision 2
<4>PDC20265: not 100%% native mode: will probe irqs later
<4>PDC20265: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER Mode.
<4>PDC20265: too many IDE interfaces, no room in table
<4>PDC20265: too many IDE interfaces, no room in table
<4>PDC20265: neither IDE port enabled (BIOS)
<4>hda: IBM-DJNA-351520, ATA DISK drive
<4>hdb: WDC WD400BB-00DEA0, ATA DISK drive
<4>hdd: Maxtor 93073U6, ATA DISK drive
<4>ide2: ports already in use, skipping probe
<4>ide3: ports already in use, skipping probe
<4>ide4: ports already in use, skipping probe
<4>ide5: ports already in use, skipping probe
<4>ide6: ports already in use, skipping probe
<4>ide7: ports already in use, skipping probe
<4>ide8: ports already in use, skipping probe
<4>ide9: ports already in use, skipping probe
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>blk: queue c039c904, I/O limit 4095Mb (mask 0xffffffff)
<4>hda: safely enabled flush
<6>hda: 30033360 sectors (15377 MB) w/430KiB Cache, CHS=1869/255/63, (U)DMA
<4>blk: queue c039ca4c, I/O limit 4095Mb (mask 0xffffffff)
<4>hdb: safely enabled flush
<6>hdb: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(66)
<4>blk: queue c039cda8, I/O limit 4095Mb (mask 0xffffffff)
<4>hdd: safely enabled flush
<6>hdd: 60030432 sectors (30736 MB) w/2048KiB Cache, CHS=59554/16/63, UDMA(33)
<4>ide-floppy driver 0.99.newide
<6>Partition check:
<6> hda: [DM6DO] [remap +63] [1869/255/63] hda1 hda2 hda3
<6> hdb: hdb1
<6> hdd: hdd1
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 16 devices)
<6>Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
<6>Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
<4>ide-floppy driver 0.99.newide
<6>SCSI subsystem driver Revision: 1.00
<3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<6>IP: routing cache hash table of 2048 buckets, 16Kbytes
<6>TCP: Hash tables configured (established 16384 bind 32768)
<6>Linux IP multicast router 0.06 plus PIM-SM
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<5>RAMDISK: Compressed image found at block 0
<6>Freeing initrd memory: 398k freed
<4>VFS: Mounted root (ext2 filesystem).
<4>reiserfs: found format "3.6" with standard journal
<4>reiserfs: checking transaction log (ide0(3,3)) for (ide0(3,3))
<4>reiserfs: using ordered data mode
<4>Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<6>Freeing unused kernel memory: 164k freed
<4>PROMISE FastTrak Series Linux Driver Version 1.03.0.1
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>LVM version 1.0.5(mp-v6)(15/07/2002) module loaded
<6>Adding Swap: 2097136k swap-space (priority 42)
<4>EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Mon Oct 13 22:09:35 2003
Configuring serial ports...
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
doneRun file system check on root for LVM activation
doneRemounting root file system (/) read/write for vgscan...
Scanning for LVM volume groups...
vgscan -- reading all physical volumes (this may take a while...)
vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
vgscan -- WARNING: This program does not do a VGDA backup of your volume group
Activating LVM volume groups...
vgchange -- no volume groups found
done
Activating swap-devices in /etc/fstab...
doneChecking file systems...
fsck 1.28 (31-Aug-2002)
Reiserfs super block in block 16 on 0x303 of format 3.6 with standard journal
Blocks (total/free): 2719001/2542849 by 4096 bytes
Filesystem is clean
/dev/hda1: clean, 35/6024 files, 5710/24066 blocks
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hda1 on /boot type ext2 (rw)
mount: you didn't specify a filesystem type for /dev/hdd1
I will try type ext2
/dev/hdd1 on /media/video type ext2 (rw,nosuid,nodev)
mount: you didn't specify a filesystem type for /dev/hdb1
I will try type vfat
/dev/hdb1 on /media/mldonkey type vfat (rw,noexec,nosuid,nodev,uid=500)
doneRestore device permissions
done
Activating remaining swap-devices in /etc/fstab...
doneMounting shared memory FS on /dev/shm
done
Setting up the CMOS clock
done
Setting up timezone data
done
Setting up hostname 'linux'
done
Setting up loopback interface
done
Enabling syn flood protection
done
Disabling IP forwarding
done
Creating /var/log/boot.msg
done<notice>killproc: kill(29,29)
Running /etc/init.d/boot.local
Boot logging started on /dev/tty1(/dev/console) at Mon Oct 13 22:09:44 2003
Master Resource Control: previous runlevel: N, switching to runlevel:
3
Initializing random number generator
done
Setting up network interfaces:
lo
done<notice>killproc: kill(29,3)
INIT: Entering runlevel: 3
<notice>/etc/init.d/rc3.d/S01random start
<notice>'/etc/init.d/rc3.d/S01random start' exits with status 0
<notice>/etc/init.d/rc3.d/S05network start
done
eth0 IP/Netmask: 192.168.0.7 / 255.255.255.0
done
Starting syslog services<notice>'/etc/init.d/rc3.d/S05network start' exits with status 0
<notice>/etc/init.d/rc3.d/S06syslog start
<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/dhcp/dev/log ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
Starting hotplugging services [<notice>'/etc/init.d/rc3.d/S06syslog start' exits with status 0
<notice>/etc/init.d/rc3.d/S07hotplug start
net pci usb .. ]
done
<notice>'/etc/init.d/rc3.d/S07hotplug start' exits with status 0
<notice>/etc/init.d/rc3.d/S09lircd start
Starting daemon lircd<notice>startproc: execve (/usr/local/sbin/lircd) [ /usr/local/sbin/lircd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/local/sbin/lircd ]
done
<notice>'/etc/init.d/rc3.d/S09lircd start' exits with status 0
<notice>/etc/init.d/rc3.d/S09nmb start
Starting Samba classic NMB daemon<notice>startproc: execve (/usr/lib/samba/classic/nmbd) [ /usr/lib/samba/classic/nmbd -D ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/lib/samba/classic/nmbd ]
done
Starting RPC portmap daemon<notice>'/etc/init.d/rc3.d/S09nmb start' exits with status 0
<notice>/etc/init.d/rc3.d/S09portmap start
done
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/sbin/portmap ]
<notice>'/etc/init.d/rc3.d/S09portmap start' exits with status 0
<notice>/etc/init.d/rc3.d/S09sshd start
Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
done
<notice>'/etc/init.d/rc3.d/S09sshd start' exits with status 0
<notice>/etc/init.d/rc3.d/S10postfix start
Starting mail service (Postfix)
done
<notice>'/etc/init.d/rc3.d/S10postfix start' exits with status 0
Mount SMB File System
unused
Starting sound driver<notice>/etc/init.d/rc3.d/S10smbfs start
<notice>checkproc: /usr/lib/samba/classic/nmbd 555
<notice>'/etc/init.d/rc3.d/S10smbfs start' exits with status 0
<notice>/etc/init.d/rc3.d/S13alsasound start
done
Starting service at daemon<notice>'/etc/init.d/rc3.d/S13alsasound start' exits with status 0
<notice>/etc/init.d/rc3.d/S13atd start
<notice>startproc: execve (/usr/sbin/atd) [ /usr/sbin/atd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/atd ]
done
Starting CRON daemon<notice>'/etc/init.d/rc3.d/S13atd start' exits with status 0
<notice>/etc/init.d/rc3.d/S13cron start
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
done
<notice>'/etc/init.d/rc3.d/S13cron start' exits with status 0
<notice>/etc/init.d/rc3.d/S13dhcpd start
Starting DHCP server <notice>startproc: execve (/usr/sbin/dhcpd) [ /usr/sbin/dhcpd -chroot /var/lib/dhcp/ -lf /dhcpd.leases -user nobody -group nogroup eth0 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/dhcpd ]
[chroot]
done
<notice>'/etc/init.d/rc3.d/S13dhcpd start' exits with status 0
<notice>/etc/init.d/rc3.d/S13fbset start
<notice>'/etc/init.d/rc3.d/S13fbset start' exits with status 0
<notice>/etc/init.d/rc3.d/S13nscd start
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
<notice>'/etc/init.d/rc3.d/S13nscd start' exits with status 0
<notice>/etc/init.d/rc3.d/S13rpmconfigcheck start
<notice>'/etc/init.d/rc3.d/S13rpmconfigcheck start' exits with status 0
<notice>/etc/init.d/rc3.d/S14kbd start
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneKeyboard: Typematic Rate set to 24.0 cps (delay = 500 ms)
doneLoading compose table winkeys shiftctrl latin1.add
done
Loading console font lat9w-16.psfu
doneLoading screenmap trivial
doneSetting up console ttys
done<notice>'/etc/init.d/rc3.d/S14kbd start' exits with status 0
<notice>/etc/init.d/rc3.d/S14smb start
<notice>Starting Samba classic SMB daemoncheckproc: /usr/lib/samba/classic/nmbd 555
<notice>startproc: execve (/usr/lib/samba/classic/smbd) [ /usr/lib/samba/classic/smbd -D ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh TMPDIR=/var/tmp INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/lib/samba/classic/smbd ]
done
Starting hardware scan on boot<notice>'/etc/init.d/rc3.d/S14smb start' exits with status 0
<notice>/etc/init.d/rc3.d/S15hwscan start
<notice>Starting inetd'/etc/init.d/rc3.d/S15hwscan start' exits with status 0
<notice>/etc/init.d/rc3.d/S20inetd start
<notice>startproc: execve (/usr/sbin/inetd) [ /usr/sbin/inetd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/inetd ]
done