-
cat /dev/zero > /dev/null
Modem Einwahl scheitert
Ich versuche mich untert Red Hat 8.0 mit einen externen Modem
über /dev/ttyS0 einzuwählen. Durch unsere telefon Anlage komme ich mit
0,, und den string atx1 den ich bei "Keien Freizeichenkennung " eingetragen habe
Ich nutze KPPP als grafisches Tool
So jetzt zu den Prob ich wähle mich ein und in den Moment
wo man von windows kennt das Benutzername und Passwort Authentifiefert werden soll
wählt Linux wieder neu an
warum ?
als authentiefzierung nehme ich PAP
danke für eure hilfe imk vorraus
-
root !*****istrator
hi,
[ ] log (var/log/messages) lege ich bei
[ ] ich habe keine logdateien
cu/2 iae
-
cat /dev/zero > /dev/null
Feb 20 14:31:05 localhost syslogd 1.4.1: restart.
Feb 20 14:31:05 localhost syslog: Starten von syslogd succeeded
Feb 20 14:31:05 localhost syslog: Starten von klogd succeeded
Feb 20 14:31:05 localhost kernel: klogd 1.4.1, log source = /proc/kmsg started.
Feb 20 14:31:05 localhost kernel: Linux version 2.4.18-14 (bhcompile@astest.test.redhat.com) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 12:13:11 EDT 2002
Feb 20 14:31:05 localhost kernel: BIOS-provided physical RAM map:
Feb 20 14:31:05 localhost kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Feb 20 14:31:05 localhost kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Feb 20 14:31:05 localhost kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Feb 20 14:31:05 localhost kernel: BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
Feb 20 14:31:05 localhost kernel: BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
Feb 20 14:31:05 localhost kernel: BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
Feb 20 14:31:05 localhost kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Feb 20 14:31:05 localhost kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Feb 20 14:31:05 localhost kernel: BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
Feb 20 14:31:05 localhost kernel: BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
Feb 20 14:31:05 localhost kernel: 0MB HIGHMEM available.
Feb 20 14:31:05 localhost kernel: 255MB LOWMEM available.
Feb 20 14:31:05 localhost kernel: On node 0 totalpages: 65520
Feb 20 14:31:05 localhost kernel: zone(0): 4096 pages.
Feb 20 14:31:05 localhost kernel: zone(1): 61424 pages.
Feb 20 14:31:05 localhost kernel: zone(2): 0 pages.
Feb 20 14:31:05 localhost kernel: Kernel command line: ro root=LABEL=/ hdd=ide-scsi hdc=ide-scsi
Feb 20 14:31:05 localhost kernel: ide_setup: hdd=ide-scsi
Feb 20 14:31:05 localhost kernel: ide_setup: hdc=ide-scsi
Feb 20 14:31:05 localhost kernel: Initializing CPU#0
Feb 20 14:31:05 localhost kernel: Detected 1526.762 MHz processor.
Feb 20 14:31:05 localhost kernel: Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized
Feb 20 14:31:05 localhost kernel: Console: colour VGA+ 80x25
Feb 20 14:31:05 localhost kernel: Calibrating delay loop... 3038.00 BogoMIPS
Feb 20 14:31:05 localhost kernel: Memory: 253024k/262080k available (1311k kernel code, 6624k reserved, 987k data, 212k init, 0k highmem)
Feb 20 14:31:05 localhost portmap: Starten von portmap succeeded
Feb 20 14:31:05 localhost kernel: Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Feb 20 14:31:05 localhost kernel: Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Feb 20 14:31:05 localhost kernel: Mount cache hash table entries: 4096 (order: 3, 32768 bytes)
Feb 20 14:31:05 localhost kernel: Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Feb 20 14:31:05 localhost kernel: Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Feb 20 14:31:05 localhost nfslock: Starten von rpc.statd succeeded
Feb 20 14:31:05 localhost kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Feb 20 14:31:05 localhost kernel: CPU: L2 Cache: 256K (64 bytes/line)
Feb 20 14:31:05 localhost kernel: Intel machine check architecture supported.
Feb 20 14:31:05 localhost kernel: Intel machine check reporting enabled on CPU#0.
Feb 20 14:31:05 localhost kernel: CPU: AMD Athlon(tm) XP 1800+ stepping 00
Feb 20 14:31:05 localhost kernel: Enabling fast FPU save and restore... done.
Feb 20 14:31:05 localhost kernel: Checking 'hlt' instruction... OK.
Feb 20 14:31:05 localhost kernel: POSIX conformance testing by UNIFIX
Feb 20 14:31:05 localhost keytable: Tastenbelegung laden:
Feb 20 14:31:05 localhost rpc.statd[502]: Version 1.0.1 Starting
Feb 20 14:31:05 localhost kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Feb 20 14:31:05 localhost kernel: mtrr: detected mtrr type: Intel
Feb 20 14:31:05 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
Feb 20 14:31:05 localhost keytable: ^[[60G
Feb 20 14:31:05 localhost kernel: PCI: Using configuration type 1
Feb 20 14:31:05 localhost kernel: PCI: Probing PCI hardware
Feb 20 14:31:05 localhost kernel: Unknown bridge resource 0: assuming transparent
Feb 20 14:31:05 localhost keytable:
Feb 20 14:31:05 localhost kernel: PCI: Using IRQ router SIS [1039/0008] at 00:02.0
Feb 20 14:31:05 localhost keytable:
Feb 20 14:31:05 localhost kernel: isapnp: Scanning for PnP cards...
Feb 20 14:31:05 localhost keytable: plus before udiaeresis ignored
Feb 20 14:31:05 localhost kernel: isapnp: No Plug & Play device found
Feb 20 14:31:05 localhost keytable: plus before Udiaeresis ignored
Feb 20 14:31:05 localhost kernel: speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
Feb 20 14:31:05 localhost keytable: plus before odiaeresis ignored
Feb 20 14:31:05 localhost kernel: Linux NET4.0 for Linux 2.4
Feb 20 14:31:05 localhost keytable: plus before Odiaeresis ignored
Feb 20 14:31:05 localhost kernel: Based upon Swansea University Computer Society NET3.039
Feb 20 14:31:05 localhost keytable: plus before adiaeresis ignored
Feb 20 14:31:05 localhost kernel: Initializing RT netlink socket
Feb 20 14:31:05 localhost keytable: plus before Adiaeresis ignored
Feb 20 14:31:05 localhost kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Feb 20 14:31:05 localhost rc: Starting keytable: succeeded
Feb 20 14:31:05 localhost kernel: Starting kswapd
Feb 20 14:31:05 localhost kernel: VFS: Diskquotas version dquot_6.5.0 initialized
Feb 20 14:31:05 localhost kernel: pty: 2048 Unix98 ptys configured
Feb 20 14:31:05 localhost kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Feb 20 14:31:05 localhost kernel: ttyS0 at 0x03f8 (irq = 4) is a 16550A
Feb 20 14:31:05 localhost kernel: ttyS1 at 0x02f8 (irq = 3) is a 16550A
Feb 20 14:31:05 localhost kernel: Real Time Clock Driver v1.10e
Feb 20 14:31:05 localhost kernel: block: 480 slots per queue, batch=120
Feb 20 14:31:05 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31
Feb 20 14:31:05 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Feb 20 14:31:05 localhost random: Zufallsnummernerzeuger initialisieren: succeeded
Feb 20 14:31:05 localhost kernel: SIS5513: IDE controller on PCI bus 00 dev 15
Feb 20 14:31:05 localhost kernel: SIS5513: chipset revision 208
Feb 20 14:31:05 localhost kernel: SIS5513: not 100%% native mode: will probe irqs later
Feb 20 14:31:05 localhost kernel: SiS735 ATA 100 controller
Feb 20 14:31:05 localhost kernel: ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hdaMA, hdbMA
Feb 20 14:31:05 localhost kernel: ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdcMA, hddMA
Feb 20 14:31:05 localhost kernel: hda: ST380021A, ATA DISK drive
Feb 20 14:31:05 localhost kernel: hdc: JLMS DVD-ROM LTD-166S, ATAPI CD/DVD-ROM drive
Feb 20 14:31:05 localhost kernel: hdd: CD-RW CDR-5W48, ATAPI CD/DVD-ROM drive
Feb 20 14:31:05 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 20 14:31:05 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Feb 20 14:31:05 localhost kernel: hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(100)
Feb 20 14:31:05 localhost kernel: ide-floppy driver 0.99.newide
Feb 20 14:31:05 localhost kernel: Partition check:
Feb 20 14:31:05 localhost kernel: hda: hda1 hda2 hda3 hda4 < hda5 >
Feb 20 14:31:05 localhost kernel: Floppy drive(s): fd0 is 1.44M
Feb 20 14:31:05 localhost kernel: FDC 0 is a post-1991 82077
Feb 20 14:31:05 localhost kernel: NET4: Frame Diverter 0.46
Feb 20 14:31:05 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Feb 20 14:31:05 localhost kernel: ide-floppy driver 0.99.newide
Feb 20 14:31:05 localhost kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Feb 20 14:31:05 localhost kernel: md: Autodetecting RAID arrays.
Feb 20 14:31:05 localhost kernel: md: autorun ...
Feb 20 14:31:05 localhost kernel: md: ... autorun DONE.
Feb 20 14:31:05 localhost kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Feb 20 14:31:05 localhost kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Feb 20 14:31:05 localhost kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes
Feb 20 14:31:05 localhost kernel: TCP: Hash tables configured (established 16384 bind 32768)
Feb 20 14:31:05 localhost kernel: Linux IP multicast router 0.06 plus PIM-SM
Feb 20 14:31:05 localhost kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Feb 20 14:31:05 localhost kernel: RAMDISK: Compressed image found at block 0
Feb 20 14:31:05 localhost kernel: Freeing initrd memory: 126k freed
Feb 20 14:31:05 localhost kernel: VFS: Mounted root (ext2 filesystem).
Feb 20 14:31:05 localhost kernel: Journalled Block Device driver loaded
Feb 20 14:31:05 localhost kernel: kjournald starting. Commit interval 5 seconds
Feb 20 14:31:05 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Feb 20 14:31:05 localhost kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Feb 20 14:31:05 localhost kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Feb 20 14:31:05 localhost kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Feb 20 14:31:05 localhost kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Feb 20 14:31:05 localhost kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Feb 20 14:31:05 localhost kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Feb 20 14:31:05 localhost kernel: Freeing unused kernel memory: 212k freed
Feb 20 14:31:05 localhost kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Feb 20 14:31:05 localhost kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Feb 20 14:31:05 localhost kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Feb 20 14:31:05 localhost kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Feb 20 14:31:05 localhost kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Feb 20 14:31:05 localhost kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Feb 20 14:31:05 localhost kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Feb 20 14:31:05 localhost kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Feb 20 14:31:06 localhost kernel: ide0: reset: success
Feb 20 14:31:06 localhost kernel: usb.c: registered new driver usbdevfs
Feb 20 14:31:06 localhost kernel: usb.c: registered new driver hub
Feb 20 14:31:06 localhost kernel: SiS router pirq escape (99)
Feb 20 14:31:06 localhost kernel: SiS router pirq escape (99)
Feb 20 14:31:06 localhost kernel: usb-ohci.c: USB OHCI at membase 0xd0849000, IRQ 11
Feb 20 14:31:06 localhost kernel: usb-ohci.c: usb-00:02.3, Silicon Integrated Systems [SiS] 7001 (#2)
Feb 20 14:31:06 localhost kernel: usb.c: new USB bus registered, assigned bus number 1
Feb 20 14:31:06 localhost netfs: Andere Dateisysteme mounten: succeeded
Feb 20 14:31:06 localhost kernel: hub.c: USB hub found
Feb 20 14:31:06 localhost kernel: hub.c: 3 ports detected
Feb 20 14:31:06 localhost kernel: PCI: Found IRQ 11 for device 00:02.2
Feb 20 14:31:06 localhost kernel: usb-ohci.c: USB OHCI at membase 0xd084b000, IRQ 11
Feb 20 14:31:06 localhost kernel: usb-ohci.c: usb-00:02.2, Silicon Integrated Systems [SiS] 7001
Feb 20 14:31:06 localhost kernel: usb.c: new USB bus registered, assigned bus number 2
Feb 20 14:31:06 localhost kernel: hub.c: USB hub found
Feb 20 14:31:06 localhost kernel: hub.c: 3 ports detected
Feb 20 14:31:06 localhost kernel: usb.c: registered new driver hiddev
Feb 20 14:31:06 localhost kernel: usb.c: registered new driver hid
Feb 20 14:31:06 localhost kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
Feb 20 14:31:06 localhost kernel: hid-core.c: USB HID support drivers
Feb 20 14:31:06 localhost kernel: mice: PS/2 mouse device common for all mice
Feb 20 14:31:06 localhost kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,3), internal journal
Feb 20 14:31:06 localhost kernel: Adding Swap: 522072k swap-space (priority -1)
Feb 20 14:31:06 localhost kernel: kjournald starting. Commit interval 5 seconds
Feb 20 14:31:06 localhost kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,1), internal journal
Feb 20 14:31:06 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Feb 20 14:31:06 localhost kernel: kjournald starting. Commit interval 5 seconds
Feb 20 14:31:06 localhost kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,2), internal journal
Feb 20 14:31:06 localhost apmd: Starten von apmd succeeded
Feb 20 14:31:06 localhost apmd[568]: Version 3.0.2 (APM BIOS 1.2, Linux driver 1.16)
Feb 20 14:31:06 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Feb 20 14:31:06 localhost kernel: SCSI subsystem driver Revision: 1.00
Feb 20 14:31:06 localhost kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Feb 20 14:31:06 localhost kernel: Vendor: JLMS Model: DVD-ROM LTD-166S Rev: DS0C
Feb 20 14:31:06 localhost kernel: Type: CD-ROM ANSI SCSI revision: 02
Feb 20 14:31:06 localhost kernel: Vendor: CD-RW Model: CDR-5W48 Rev: VSG3
Feb 20 14:31:06 localhost kernel: Type: CD-ROM ANSI SCSI revision: 02
Feb 20 14:31:06 localhost kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE]
Feb 20 14:31:06 localhost kernel: ohci1394: pci_module_init failed
Feb 20 14:31:06 localhost kernel: ip_tables: (C) 2000-2002 Netfilter core team
Feb 20 14:31:06 localhost autofs: automount startup succeeded
Feb 20 14:31:06 localhost sshd: sshd starten:
Feb 20 14:31:06 localhost sshd: succeeded
Feb 20 14:31:06 localhost sshd: ^[[60G
Feb 20 14:31:06 localhost sshd:
Feb 20 14:31:06 localhost rc: Starting sshd: succeeded
Feb 20 14:31:07 localhost apmd[568]: Charge: * * * (-1% unknown)
Feb 20 14:30:47 localhost rc.sysinit: Mounting proc filesystem: succeeded
Feb 20 14:30:47 localhost rc.sysinit: Unmounting initrd: succeeded
Feb 20 14:30:47 localhost sysctl: net.ipv4.ip_forward = 0
Feb 20 14:30:47 localhost sysctl: net.ipv4.conf.default.rp_filter = 1
Feb 20 14:30:47 localhost sysctl: kernel.sysrq = 0
Feb 20 14:30:47 localhost sysctl: kernel.core_uses_pid = 1
Feb 20 14:30:47 localhost rc.sysinit: Configuring kernel parameters: succeeded
Feb 20 14:30:47 localhost date: Don Feb 20 14:30:46 CET 2003
Feb 20 14:30:47 localhost rc.sysinit: Setting clock (localtime): Don Feb 20 14:30:46 CET 2003 succeeded
Feb 20 14:30:47 localhost rc.sysinit: Loading default keymap succeeded
Feb 20 14:30:47 localhost unicode_start: plus before udiaeresis ignored
Feb 20 14:30:47 localhost unicode_start: plus before Udiaeresis ignored
Feb 20 14:30:47 localhost unicode_start: plus before odiaeresis ignored
Feb 20 14:30:47 localhost unicode_start: plus before Odiaeresis ignored
Feb 20 14:30:47 localhost unicode_start: plus before adiaeresis ignored
Feb 20 14:30:47 localhost unicode_start: plus before Adiaeresis ignored
Feb 20 14:30:47 localhost unicode_start: ^[%G
Feb 20 14:30:47 localhost rc.sysinit: Setting default font (latarcyrheb-sun16): succeeded
Feb 20 14:30:47 localhost rc.sysinit: Setting hostname localhost.localdomain: succeeded
Feb 20 14:30:47 localhost rc.sysinit: Initializing USB controller (usb-ohci): succeeded
Feb 20 14:30:47 localhost rc.sysinit: Mounting USB filesystem: succeeded
Feb 20 14:30:47 localhost rc.sysinit: Initializing USB HID interface: succeeded
Feb 20 14:30:47 localhost rc.sysinit: Initializing USB keyboard: succeeded
Feb 20 14:30:47 localhost rc.sysinit: Initializing USB mouse: succeeded
Feb 20 14:30:47 localhost fsck: /: clean, 218250/1921984 files, 1111375/3839535 blocks
Feb 20 14:30:47 localhost rc.sysinit: Checking root filesystem succeeded
Feb 20 14:30:47 localhost rc.sysinit: Remounting root filesystem in read-write mode: succeeded
Feb 20 14:30:47 localhost rc.sysinit: Activating swap partitions: succeeded
Feb 20 14:30:49 localhost rc.sysinit: Finding module dependencies: succeeded
Feb 20 14:30:50 localhost /etc/hotplug/usb.agent: Setup usbcore for USB product 0/0/0
Feb 20 14:30:50 localhost /etc/hotplug/usb.agent: Setup usbcore for USB product 0/0/0
Feb 20 14:30:50 localhost fsck: /boot: clean, 51/26104 files, 20554/104391 blocks
Feb 20 14:30:50 localhost /etc/hotplug/usb.agent: Setup usbcore for USB product 0/0/0
Feb 20 14:30:50 localhost /etc/hotplug/usb.agent: Setup usbcore for USB product 0/0/0
Feb 20 14:30:50 localhost fsck: /home: clean, 257/7782400 files, 252775/15540879 blocks
Feb 20 14:30:50 localhost rc.sysinit: Checking filesystems succeeded
Feb 20 14:30:50 localhost rc.sysinit: Mounting local filesystems: succeeded
Feb 20 14:30:50 localhost rc.sysinit: Enabling local filesystem quotas: succeeded
Feb 20 14:30:51 localhost rc.sysinit: Enabling swap space: succeeded
Feb 20 14:30:53 localhost init: Entering runlevel: 5
Feb 20 14:30:55 localhost kudzu: Updating /etc/fstab succeeded
Feb 20 14:31:04 localhost kudzu: succeeded
Feb 20 14:31:04 localhost rc: Starting iptables: succeeded
Feb 20 14:31:04 localhost sysctl: net.ipv4.ip_forward = 0
Feb 20 14:31:04 localhost sysctl: net.ipv4.conf.default.rp_filter = 1
Feb 20 14:31:04 localhost sysctl: kernel.sysrq = 0
Feb 20 14:31:04 localhost sysctl: kernel.core_uses_pid = 1
Feb 20 14:31:04 localhost network: Netzwerkparameter einstellen: succeeded
Feb 20 14:31:05 localhost network: Loopback Interface hochfahren: succeeded
Feb 20 14:31:08 localhost xinetd[621]: xinetd Version 2.3.7 started with libwrap options compiled in.
Feb 20 14:31:08 localhost xinetd[621]: Started working: 3 available services
Feb 20 14:31:10 localhost xinetd: Starten von xinetd succeeded
Feb 20 14:31:11 localhost privoxy: Feb 20 14:31:11 Privoxy(08192) Info: loading configuration file '/etc/privoxy/config':
Feb 20 14:31:12 localhost privoxy: Starten von privoxy succeeded
Feb 20 14:31:12 localhost gpm: Starten von gpm succeeded
Feb 20 14:31:13 localhost canna: Starten von cannaserver succeeded
Feb 20 14:31:13 localhost crond: Starten von crond succeeded
Feb 20 14:31:13 localhost kWnn: kWnn starten:
Feb 20 14:31:14 localhost kWnn: ^[[60G
Feb 20 14:31:14 localhost kWnn:
Feb 20 14:31:14 localhost rc: Starting kWnn: succeeded
Feb 20 14:31:15 localhost xfs: Starten von xfs succeeded
Feb 20 14:31:15 localhost xfs: listening on port 7100
Feb 20 14:31:15 localhost anacron: Starten von anacron succeeded
Feb 20 14:31:15 localhost atd: Starten von atd succeeded
Feb 20 14:31:15 localhost wine: Binär-Handler für Windows-Anwendungen registrieren
Feb 20 14:31:16 localhost rc: Starting wine: succeeded
Feb 20 14:31:16 localhost rc: Starting mdmonitor: succeeded
Feb 20 14:31:32 localhost login(pam_unix)[796]: session opened for user root by LOGIN(uid=0)
Feb 20 14:31:32 localhost -- root[796]: ROOT LOGIN ON tty2
Feb 20 14:33:09 localhost kernel: end_request: I/O error, dev 02:00 (floppy), sector 0
-
root !*****istrator
gut, jetzt wissen wir alles über das booten deines rechners
versuch dich bitte mal einzuwählen und dann die enstprechenden passagen aus der /var/log/messages hier posten
cu/2 iae
-
cat /dev/zero > /dev/null
er schreibt nichts beim einwählen in massege ein ich habe nur dieses
aus dem Login-Script zu Fehleranalyse von Kppp
OK
ATM1L3
OK
ATDT0,,0192658ATZ
OK
ATM1L3
OK
ATDT0,,0192658
-
Hallo Thallez,
interessant wäre jetzt auch deine Config-Datei für kppp und die Bezeichnung des verwendeten Modems.
Hast du deinen Lautsprecher bei der Einwahl eingeschaltet? Wenn ja, kriegt dein Modem eine (freie) Amtsleitung? (wahrscheinlich, nach dem Log.)
Viele Grüße,
CEROG
-
cat /dev/zero > /dev/null
ja bekommt es es wählt sich ein und dann wenn du ruche pause kommt in der die anmeldung passiert startet es den vorgang neu
-
Das bedeutet, entweder stimmt deine Einwahlnummer nicht oder der String, den kppp ans Modem sendet oder deine Authentifizieriung.
Ich wähle mich mit wvdial ein und erhalte folgende Ausgabe:
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2
ATQ0 V1 E1 S0=0 &C1 &D2
OK
--> Modem initialized.
--> Idle Seconds = 1800, disabling automatic reconnect.
--> Sending: ATDT0191011
--> Waiting for carrier.
ATDT0191011
CONNECT 33600/ARQ/V34/LAPM/V42BIS
Bei dir sind im kppp-log zwei Kommata. Da würde ich mal genauer nachschauen.
Ansonsten schai dir doch mal die Config-Datei von kppp an.
-
cat /dev/zero > /dev/null
ich nehme jetzt wvdial uns es geht prima und ohne prob
dennoch danke für eure hilfe
Berechtigungen
- Neue Themen erstellen: Nein
- Themen beantworten: Nein
- Anhänge hochladen: Nein
- Beiträge bearbeiten: Nein
-
Foren-Regeln
Lesezeichen